Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Concrete Driveway Installation Cost in Dallas?
A new concrete driveway in Dallas typically costs $4,500 to $12,000 for a standard two-car driveway in 2026, with most homeowners paying around $8.25 per square foot installed. A basic 500-square-foot pour without tear-out usually lands between $4,500 and $6,500, while a larger or more detailed driveway with a full tear-out, grading, and stamped finishes runs toward the top of that range. At Penhallow Remodeling Dallas, we put that number in writing before any work starts, so the price you see is the price you pay.
If you’re weighing a concrete driveway against other options, you’re in the right place. This guide breaks down real Dallas pricing, what drives the cost up or down, and how to avoid the surprises that make driveway projects go sideways. And if you’d rather skip the reading, call (940) 204-5368 and we’ll give you a straight answer over the phone.
Key Takeaways: Concrete Driveway Costs in Dallas
- Average total cost: $4,500 – $12,000 for a residential concrete driveway in the Dallas metro.
- Per-square-foot price: $7 – $12 installed for standard gray concrete; $12 – $20 for stamped or stained finishes.
- Tear-out of an existing driveway: $700 – $2,200 depending on thickness and disposal fees.
- Biggest cost drivers: driveway size, existing slab removal, site prep, concrete thickness, and finish type.
- Typical timeline: 2 – 5 days from demo to driveable, with 7 days of curing before full vehicle use.
Concrete Driveway Installation Cost Breakdown (2026)
Here’s what a concrete driveway in Dallas actually costs, line by line. These numbers reflect what our team sees across North Dallas, Richardson, Garland, Mesquite, Irving, and the surrounding suburbs in 2026.
| Cost Component | Typical Range | Notes |
|---|---|---|
| Standard concrete pour (material + labor) | $7 – $12 per sq. ft. | 4-inch slab, 3,000 – 3,500 PSI mix, typical Dallas soil conditions |
| Permit fees (City of Dallas) | $150 – $450 | Required for new driveway installation within city limits |
| Existing driveway removal | $700 – $2,200 | Depends on slab thickness, rebar, and dump fees |
| Site grading and base prep | $400 – $1,200 | Includes compacted base material; clay-heavy Dallas soil often needs extra work |
| Rebar or wire mesh reinforcement | $300 – $900 | Standard for most Dallas installations given expansive clay soils |
| Stamped concrete finish | $12 – $20 per sq. ft. | Adds texture and pattern; common finishes include flagstone and ashlar slate |
| Exposed aggregate finish | $10 – $16 per sq. ft. | Popular in Dallas for slip resistance and heat reflection |
| Stained or colored concrete | $2 – $6 per sq. ft. added | Integral color or acid stain over the base pour |
| Expansion joints and control cuts | $150 – $500 | Prevents cracking from Dallas temperature swings |
So a straight replacement of a 480-square-foot two-car driveway in plain gray concrete typically lands around $5,500 – $7,800 including tear-out and prep. The same footprint with a stamped finish and integral color pushes closer to $9,500 – $12,500.
One thing Dallas homeowners don’t always expect: our clay-heavy soil shifts. That’s why we recommend rebar reinforcement and proper compaction on every pour, not just the high-end ones. Cutting corners on base prep is how you get a driveway that cracks unevenly within two years, and that repair costs more than doing it right the first time.
What Affects Concrete Driveway Installation Pricing in Dallas
Every driveway bid in Dallas gets shaped by half a dozen factors. Here’s what moves the number.
- Driveway size and layout. A standard two-car driveway runs 400 – 600 square feet. Wider driveways, curved approaches, or a long run from a garage to the street in neighborhoods like Lake Highlands or Preston Hollow add square footage fast. That’s the single biggest driver of total cost.
- Existing slab removal. If you’re replacing an old driveway rather than pouring on a fresh build, tear-out adds $700 – $2,200. Heavily reinforced slabs from the 1980s and 1990s in older Dallas neighborhoods like Casa View or Lochwood tend to run higher because the concrete is thicker and harder to break.
- Soil conditions and grading. Much of Dallas sits on expansive clay soil that swells when wet and shrinks when dry. Proper compaction and sometimes a thicker base layer of crushed stone are needed to prevent heaving. If your lot has poor drainage or a significant slope, expect additional grading costs.
- Concrete thickness and PSI rating. A 4-inch slab at 3,000 PSI works for passenger cars. If you park a truck, boat, or RV, we recommend 5 – 6 inches at 3,500 – 4,000 PSI. The thicker and stronger the pour, the higher the material cost. That upgrade typically adds $0.80 – $1.50 per square foot but meaningfully extends the driveway’s life under load.
- Finish type. Plain broom-finished gray concrete is the most affordable. Stamped concrete, exposed aggregate, and integral color all add cost for materials and labor. Stamped work in particular is labor-intensive, and the pattern you choose matters: a basic running bond is simpler than a detailed ashlar slate texture.
- Permits and HOA requirements. The City of Dallas requires a permit for driveway work within the right-of-way and for any new driveway approach. Some HOAs in neighborhoods like Lakewood or Bluffview also have aesthetic standards that may require specific finishes, which can push costs up by a few hundred to over a thousand dollars.
Concrete vs. Other Driveway Materials: Dallas Cost Comparison
If you’re weighing materials, it helps to see concrete side by side with the alternatives. Here’s how the numbers compare in the Dallas market.
| Driveway Material | Typical Dallas Cost | Lifespan | Maintenance Profile |
|---|---|---|---|
| Concrete | $4,500 – $12,000 | 25 – 40 years | Low; occasional sealing every 3 – 5 years |
| Asphalt | $3,500 – $9,000 | 15 – 25 years | Moderate; sealcoat every 2 – 3 years; softens in Dallas heat |
| Paver driveway | $7,000 – $18,000 | 30 – 50 years | Low; individual pavers replaceable; weed control needed in joints |
| Gravel | $1,500 – $4,000 | 10 – 20 years | High; regrading and replenishment required; not allowed in many Dallas HOAs |
Concrete sits in the middle of the cost curve but wins on heat and durability in North Texas. Asphalt gets soft and sticky during Dallas summers where surface temps regularly pass 140 degrees. Pavers look excellent and hold up beautifully, but the upfront cost runs 50 – 80 percent higher. For most Dallas homeowners, poured concrete is the practical middle path: affordable, long-lasting, and able to handle our freeze-thaw cycles better than asphalt.
And if your driveway is past repair rather than due for a new install, our home guide covers full driveway replacement options, or you can jump directly to our Concrete Driveway Installation in Dallas page for service details.
Is It Worth Repairing Instead of Replacing?
Sometimes the smarter money is on a repair rather than a full replacement. Here’s the honest breakdown.
A simple crack fill or patch in Dallas runs $150 – $600. Resurfacing a driveway with a concrete overlay costs $2,500 – $6,000 for a standard two-car driveway. If your existing slab is structurally sound but has surface spalling, scaling, or cosmetic cracking, resurfacing can buy you another 10 – 15 years at roughly half the cost of replacement.
But if you’re seeing alligator cracking across more than 30 percent of the surface, significant sinking or heaving at the joints, or drainage problems that pool water against your foundation, patching is money wasted. Those are structural failures, and in Dallas clay soil they tend to worsen rather than stabilize. The honest test: if a repair costs more than 50 percent of replacement and the slab is over 20 years old, replacement usually wins.
Our team gives you that straight answer on a free estimate visit. We’re not paid to sell you a new driveway if the old one has life left in it. Call (940) 204-5368 and we’ll tell you which path makes sense for your slab.
How to Save on Concrete Driveway Installation in Dallas
You don’t have to overpay for a good driveway. Here are practical ways to keep the number reasonable without cutting corners that will cost you later.
- Time your pour for the off-season. Dallas contractors are busiest in spring and early summer. Late fall and winter pours, when the ground is dry and schedules are lighter, often come in 5 – 10 percent lower. Concrete cures well in Texas’s mild winters, so you’re not sacrificing quality.
- Keep the footprint simple. A rectangular two-car driveway costs less than a curved, flared, or double-wide approach. Every extra curve means more formwork and more cutting. If you have flexibility, dial back the footprint before you dial back the concrete quality.
- Choose broom finish over stamped. A clean, properly sloped broom finish in standard gray is the most durable and least expensive surface you can get. You can always add a stain or overlay later if you want to upgrade the look.
- Bundle with other concrete work. If you’re already planning a patio, walkway, or a garage apron pour, doing them together reduces mobilization costs. One setup, one concrete order, one crew visit. That’s genuine savings, not a gimmick.
- Get a written, itemized price. This is the one that saves the most in the long run. A contractor who’ll put every line item on paper before work starts is a contractor whose final bill will match the quote. Penhallow Remodeling Dallas provides a written price on every driveway project, with no verbal ballparks and no “we’ll see how it goes” language. Call (940) 204-5368 for your free, written estimate.
How Long Does a Concrete Driveway Last in Dallas?
In Dallas, a properly installed concrete driveway lasts 25 to 40 years. The wide range comes down to three things: the quality of the base prep, the concrete’s PSI rating, and how consistently you keep water away from the slab edges.
Dallas’s freeze-thaw cycle is mild compared to northern states, but it’s not zero. We get enough winter nights below freezing to matter. Water that seeps into hairline cracks, freezes, and expands will widen those cracks over time. Proper control joints cut at the right intervals manage this by giving the slab designated places to crack invisibly.
Clay soil movement is the bigger threat here. When the soil under the slab expands and contracts with moisture changes, a poorly prepared base lets the slab flex unevenly. That’s why we spend extra effort on compacted base material and rebar reinforcement. It’s not visible in the finished product, but it’s what separates a 15-year driveway from a 35-year one.
Sealing the surface every 3 – 5 years also helps. A quality penetrating sealer in Dallas runs about $0.50 – $1.00 per square foot applied, and it protects against both water intrusion and the relentless Texas UV exposure that can gray and chalk the surface over time.
What’s the Difference Between a 4-Inch and 6-Inch Concrete Driveway?
Most residential driveways in Dallas are poured at 4 inches thick with rebar reinforcement. That’s standard and works well for cars, SUVs, and light trucks. If you park a heavy pickup, a boat, an RV, or any commercial equipment, we recommend bumping to 5 – 6 inches at 3,500 – 4,000 PSI.
The upgrade adds $0.80 – $1.50 per square foot, which on a 500-square-foot driveway translates to roughly $400 – $750 in added cost. Against the full project price, that’s modest insurance. The extra thickness distributes load over a wider area, reducing point-load cracking under heavy tires.
One note from our experience across Dallas: if you’re in a neighborhood with alley-loaded garages in areas like Bishop Arts or Lower Greenville, the driveway approach may need to handle heavier and more frequent turning traffic than a standard suburban driveway. In those cases, a 5-inch pour with a slightly higher PSI is a smart upgrade, and we’ll say so during the estimate rather than upselling it after the fact.
FAQ: Concrete Driveway Installation Cost in Dallas
How much does a concrete driveway cost per square foot in Dallas?
A standard broom-finished concrete driveway in Dallas runs $7 – $12 per square foot installed, including base prep and reinforcement. Stamped or stained finishes run $12 – $20 per square foot. For an exact per-square-foot number on your specific driveway, call (940) 204-5368 and we’ll measure it out with you.
How much is a 2-car concrete driveway in Dallas?
A standard two-car concrete driveway in Dallas costs $5,500 – $9,000 for a basic gray pour, including tear-out of an existing slab, grading, rebar reinforcement, and finishing. Stamped or specialty finishes bring that range to $8,500 – $13,000. The exact number depends on your square footage and existing site conditions.
How long before I can drive on a new concrete driveway?
You can typically walk on new concrete after 24 hours. For vehicle traffic, we recommend waiting 7 days for a standard 3,000 – 4,000 PSI mix to reach sufficient strength. Concrete continues to cure and gain strength for 28 days. In Dallas’s summer heat, proper curing is especially important because rapid moisture loss can weaken the surface. We use curing compounds and, when needed, wet-curing procedures to keep that from happening.
Does a concrete driveway in Dallas require a permit?
Yes. The City of Dallas requires a permit for new driveway installation and for replacement work that touches the right-of-way or the driveway approach from the street. Permit fees typically run $150 – $450. A reputable contractor handles this paperwork for you. If a contractor suggests skipping the permit to save money, that’s a red flag that will likely cost more in fines and complications than the permit itself. Penhallow Remodeling Dallas pulls all required permits as part of the written project price.
Is it cheaper to repair or replace a concrete driveway in Dallas?
For surface cracks, spalling, or cosmetic issues, repair or resurfacing costs $150 – $600 for spot fixes or $2,500 – $6,000 for a full overlay, which is cheaper than the $4,500 – $12,000 full replacement. But if the slab has structural cracking, significant sinking, or drainage failures, replacement is the honest recommendation. If you’re unsure, call (940) 204-5368 for a free assessment. We’ll tell you straight which option makes financial sense for your driveway.
Why Dallas Homeowners Choose Penhallow Remodeling for Driveway Work
Trevor Nash runs Penhallow Remodeling Dallas under a standard that’s been in place since 2004: a written price before any work starts, a defined arrival window, a clean job site, and a 365-Day Done Right Promise on every project. If something fails inside that first year, we come back and fix it at no charge. It’s in writing on every job, not just spoken at the estimate.
What does that look like in practice? You call us, a real person answers 24/7. We schedule a time to assess your driveway, take measurements, and talk through exactly what you’re getting and what it costs. Then we hand you a written price you can hold us to. No surprises at the door, no “scope changed” conversations after demo. The background-checked, uniformed crew shows up when we said they would, does the work, and leaves the site clean enough to park a car you care about on it.
We’re not the cheapest bid in Dallas, and we’re fine saying so. What we offer is a number that doesn’t move and a guarantee that means something. If you’ve been through a driveway project that went sideways before, you already know what that’s worth.
Get Your Concrete Driveway Price in Writing
You don’t have to guess what a concrete driveway will cost in Dallas. You can have the exact number, itemized, in writing, before you commit to anything. Call (940) 204-5368 and we’ll schedule a free estimate at your home. Trevor and the Penhallow Remodeling Dallas team will measure your driveway, walk the site, and give you a written price that covers everything from permit to pour to final finish. The estimate is free. The guarantee is in writing. The driveway is worth doing right the first time.
Pricing reflects the Dallas market as of 2026. Penhallow Remodeling Dallas offers free estimates – call (940) 204-5368.
Written by Trevor Nash, Owner at Penhallow Remodeling Dallas, serving the Dallas metro since joining the Kingswell family of companies in 2004.
What Our Customers Say
"Full home refresh before we sold. They were straight about what was worth doing and what wasn't to get our money back. On time, on budget, and it sold in a week."
- Monica Vaughn"We'd been burned by a contractor before who disappeared halfway. Penhallow finished on time and stood behind everything. The written price gave me peace of mind the whole way."
- Simone Clarke"Redid two bathrooms at once. The crew protected the floors and cleaned up every single day before leaving. Quote was detailed and there were no mystery charges at the end."
- Tricia Dawson
