Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Oldcastle Bathroom Remodeling: The Dallas Owner’s Guide
If you have an Oldcastle bathroom product that’s failed or is starting to show its age, we can handle the remodel around it. A full Oldcastle-compatible bathroom remodel in Dallas typically runs $9,000 – $28,000 installed, depending on whether we’re replacing a shower surround, reconfiguring the wet area, or gutting the whole room down to studs. Most Dallas homeowners call us after they notice cracked grout lines, water staining on the ceiling below, or a shower pan that flexes underfoot. Trevor Nash, who owns Penhallow Remodeling Dallas, has seen enough of these jobs to know that what starts as a small leak usually means the waterproofing layer beneath the Oldcastle unit has already been compromised.
Which Oldcastle Models This Applies To
Oldcastle bathroom products fall into a few distinct lines, and they’re not interchangeable. The most common ones we run into in Dallas homes are the Oldcastle Sure-Set series shower pans, the EZ-Wall surround systems, and their builder-grade tub-and-shower combos. The compatibility gotcha with Oldcastle is that early Sure-Set pans used a proprietary 2-inch drain flange that won’t accept standard off-the-shelf shower drains. If you flip the pan over, you’ll see a model number stamped into the ABS near the drain hole; we need that number to match the right drain assembly.
When it comes to OEM versus aftermarket: Oldcastle no longer manufactures for the retail replacement market in most categories, so genuine OEM surrounds are hard to source. Quality aftermarket options from brands like Kohler and Moen will often drop into the same footprint, but we need to know the exact rough-in dimensions before we order anything. Bring us a photo of the model sticker and a few measurements, and we’ll tell you straight what fits and what doesn’t.
Styles & brands we work with
Signs Your Oldcastle Bathroom Remodeling Is Failing
- Grout that keeps cracking in the same places: This usually means the substrate (the cement board or drywall layer behind your tile or surround) is flexing or has absorbed water. Re-grouting won’t fix the real problem; the movement is underneath.
- A shower pan that flexes or creaks: Oldcastle pans set over a mortar bed should feel rock solid. If it moves when you step in, the mortar support has broken down and the pan is now flexing at the drain connection, which is the first thing to crack.
- Water staining on the ceiling or wall below: By the time you see this, the leak has been running for weeks. The pan or the drain flange has failed, and the water is traveling through the subfloor before it shows up where you can see it.
- Mold or mildew that returns days after cleaning: Persistent mold inside the surround joints means water is sitting behind the surface layer. The substrate is saturated, and a surface clean never addresses it.
- Loose or separating surround panels: Adhesive failure on Oldcastle EZ-Wall panels happens after years of Dallas heat and humidity cycling. Once the panel pulls away, water gets behind it fast, and the wall behind the panel starts to rot.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A true Oldcastle-compatible bathroom remodel in Dallas is not a $2,000 patch job, and anyone who quotes you that is going to disappear once they open the wall. Real numbers for the work we do: a tub-to-shower conversion lands between $3,500 and $10,000, a walk-in shower installation runs $4,500 – $12,000, and a full bathroom remodel replacing everything from the Oldcastle pan to the vanity typically comes in at $9,000 – $28,000.
What drives the range is what we find when we pull the old unit. If the subfloor is solid and the framing is straight, the job stays on the lower end. If the water has been leaking for a year, we’re replacing subfloor, possibly some framing, and then rebuilding the waterproofing system correctly. Every quote includes parts, labor, haul-away, and our 365-Day Done Right Promise in writing before work starts. The number on day one is the number on the invoice.
DIY or Call Us?
You can safely check a few things yourself: look for loose drain covers, shine a flashlight along the pan edges for hairline cracks, and watch for water pooling that wasn’t there before. What you shouldn’t do is start pulling the Oldcastle pan or cutting into the surround. The moment you break the waterproofing layer, you’ve taken a repairable problem and turned it into a structural one, and now you’re dealing with subfloor damage and mold remediation on top of everything else.
Replacing an Oldcastle shower pan means resetting the drain, re-bedding the mortar, and re-waterproofing. It’s not a weekend project, and the stakes are a bathroom floor that fails again six months later. Call Trevor Nash and our team at (940) 204-5368. We’ll give you a written price before we pick up a tool, and the quote holds.
FAQs
In Dallas humidity and hard-water conditions, we typically see Oldcastle shower pans and surrounds last 10 – 15 years before the waterproofing begins to fail. Pans over properly mortared bases last on the longer end; surrounds with adhesive-only installation fail earlier. If your unit is past the 12-year mark and showing any of the warning signs above, plan for replacement before the leak hits your subfloor.
Small hairline cracks in the pan surface can sometimes be patched with an epoxy repair, but it’s a temporary fix on a failing component. If the pan flexes, if the drain flange has separated, or if water is traveling through, no patched repair will hold. We’ll give you an honest read on whether a repair buys you a year or just wastes your money. Call (940) 204-5368 and we’ll walk you through it.
Most Oldcastle-compatible bathroom remodels in Dallas take 5 – 10 working days from demo to final trim. A straightforward walk-in shower replacement runs 3 – 5 days. If we find subfloor or framing damage, that adds time, and we’ll tell you before we start so you’re not surprised.
We don’t keep a warehouse of Oldcastle-branded replacement parts, because Oldcastle has largely exited the retail replacement business. What we stock on our trucks are the quality aftermarket components we trust, including Kohler and Moen drain assemblies, proper mortar and waterproofing systems, and the right substrates for wet areas. We also work with KraftMaid, Cambria, and Silestone for the finishes that go back in alongside. Call (940) 204-5368 and we’ll match the right parts to your Oldcastle model before we ever set foot in your bathroom.
Written by Trevor Nash, Owner, Penhallow Remodeling Dallas at Penhallow Remodeling Dallas, serving Dallas and nearby areas.
