Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Dallas Homeowners Choose Mr-Glass Construction
We’re an independent Dallas Mr Glass service provider in Dallas, TX, and we handle everything from frameless shower enclosure installation to full bathroom remodels built around Mr-Glass products. Our crew works on Mr-Glass Euro Series sliding doors, Neo-Angle enclosures, and fixed panel systems in neighborhoods across Dallas, from Lake Highlands to Oak Cliff. The difference is field experience: we see how these enclosures actually behave after five or ten years of Dallas hard water and summer heat, so we fix the real problem, not just the symptom. Call (940) 204-5368 for a written estimate before any work starts.
Penhallow Remodeling Dallas is not affiliated with or authorized by Mr-Glass. We’re a local General Contractor with deep hands-on experience servicing and installing Mr-Glass products, and we’re upfront about that from the first phone call.
Why Trust Penhallow Remodeling Dallas for Your Mr-Glass Construction?
Trevor Nash, our owner, has worked construction since he picked up a framing hammer in a neighbor’s garage at fourteen and trained at Los Angeles Trade-Technical College before bringing his crew to the Dallas area. That background matters when you’re dealing with frameless glass: getting a panel plumb, a track level, and a seal watertight on a Dallas slab foundation takes more than reading an installation manual. We’ve pulled Mr-Glass enclosures out of 1950s ranch bathrooms in East Dallas and new builds near White Rock Lake, so we know how each series fits, flexes, and eventually fails in this climate. We also provide Mr Glass in Irving and surrounding communities.
Every Mr-Glass job gets what every Penhallow job gets: a written price before we pick up a tool, a defined arrival window, and our 365-Day Done Right Promise in writing. If the work fails inside a year, we come back and fix it at no charge. No re-inspection fee, no service call charge. We also warranty every repair in writing, and our technicians are background-checked and arrive in uniform, so you know exactly who’s walking through your door.
Styles & brands we work with
Common Mr-Glass Construction Problems We Fix in Dallas
Dallas water is hard, the UV is intense, and slab foundations move with the blackland prairie clay. That creates a specific set of failures in Mr-Glass enclosures that we see over and over:
- Binding rollers on Euro Series sliding doors. Hard-water scale builds up in the bottom track, the rollers grind against the calcium, and the door starts to drag or jump the track. We chip out the scale, inspect the roller assemblies, and replace them with OEM Mr-Glass parts when they’re worn flat.
- Loose Neo-Angle header brackets. Tile walls settle and shift slightly as the expansive clay under a Dallas slab moves through wet and dry seasons. The header brackets lose their grip, the top hinge droops, and the door scrapes the curb. We reseat the bracket into a stud or add proper anchoring, then realign the door so it swings clean.
- Brittle vinyl sweep seals on hinged doors. Years of Dallas sun and bathroom humidity turn the sweep seal hard and cracked. Water leaks under the door and onto the floor, and in slab homes that water has nowhere to go but into the baseboard and under the finished flooring. We replace the sweep with a properly sized seal, not a generic strip.
- Fixed panel support bars pulling out of drywall. When the original installer missed the stud, the support bar for a fixed panel loosens over time and the glass starts to flex. That flex eventually cracks the panel or breaks the silicone seal. We anchor the bar into a stud or install a proper blocking system before resealing.
- Track corrosion on older enclosures. Some older Mr-Glass units used plated tracks that pit and flake after years of standing water and hard-water minerals. We’ll tell you honestly when the track has reached the point where replacement costs less than another repair.
Mr-Glass Parts & Our Repair-vs-Replace Approach
We try OEM Mr-Glass rollers, hinges, and seals first. They’re engineered to match the original design, and using them keeps the door swinging or sliding the way it did on day one. For discontinued enclosures, we keep a stock of high-quality aftermarket equivalents that we’ve tested on Dallas hard water, so we’re not waiting weeks for a backordered part.
Here’s where we’re straight with you: if a frame is corroded through or a glass panel is chipped or scratched beyond a fix, we’ll say so. We don’t stack repairs on a unit that’s at the end of its useful life. The decision is always yours, but you’ll get our honest read on whether a $300 repair or a $4,500 replacement is the smarter money. Call (940) 204-5368 and we’ll walk you through it in plain English.
Our Mr-Glass Service Process – Step by Step
- 1
Diagnosis. We schedule a real arrival window, show up, and inspect the entire enclosure, not just the part that’s failing. A door scraping the curb is often a settling header, not just a hinge problem. We test the panel, the track, the seals, and the surrounding tile and substrate (the layer behind your tile that keeps water out of the framing).
- 2
Written quote. Before we do any work, you get a written number with line items. That number doesn’t change at the door. Give you a number before I pick up a tool, that’s the only way we know how to start.
- 3
Repair or installation. Our technician works with OEM or tested aftermarket parts, levels and shims every track, anchors every bracket into structure, and seals every joint with the right silicone for wet areas.
- 4
Testing. We run water, open and close the door or panel repeatedly, and check for any drip, drag, or wobble. If something’s off, we correct it before we call the job done.
- 5
Written warranty. Every job leaves with our 365-Day Done Right Promise in writing. If the repair fails inside a year, we come back free of charge. No exceptions, no fine print.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Products We Service & Install in Dallas
We work on the full line of Mr-Glass shower enclosures and doors, including the Euro Series frameless sliding doors, Neo-Angle enclosures, fixed panels with inline support bars, and hinged doors with transoms. In our Dallas service van, we typically carry OEM rollers for Euro Series units, replacement sweep seals, header bracket kits, and a range of hinges, so most common repairs happen in one visit. We also offer Mr Glass service in Plano for homeowners outside the city center. For larger installations, like a walk-in shower built around a Mr-Glass enclosure, we pull the glass, build the pan and walls to spec, and set the unit as the centerpiece of the room.
We Also Service These Brands
Mr-Glass is one line we work with regularly, but our Dallas crew also installs and services KraftMaid and Wellborn cabinetry, Cambria, Silestone and Caesarstone countertops, and Kohler and Moen fixtures. That matters when your Mr-Glass enclosure is part of a larger bathroom remodel and you need one contractor who can handle the whole thing without subcontractor roulette.
FAQs – Mr-Glass Construction Service in Dallas
Yes, in most cases we fix it in place without removing the glass. Jumping the track usually means the rollers have worn flat or the bottom track has built up enough hard-water scale to throw the door off its groove. We remove the door, chip out the calcium, inspect and replace the rollers, and reset the door. Call (940) 204-5368 and we’ll schedule a real arrival window.
Yes, we keep OEM Mr-Glass rollers for most neo-angle models on the van, and we stock aftermarket equivalents for discontinued units. If a roller is no longer made, we’ll tell you before we order anything and give you the option of a direct replacement part or a retrofit that keeps the original door.
You can, and we do. If the glass is chipped, cracked, or etched beyond repair, we order a replacement panel cut to the exact dimensions of your enclosure, then reset it with the proper anchors and a full silicone seal. It’s usually faster and cheaper than replacing the whole unit when the frame and hardware are still solid.
Scraping almost always means the top hinge has loosened or the header bracket shifted. In Dallas, that’s often a sign the tile wall moved slightly with the clay soil under the slab. We inspect the bracket, reseat it into a stud, and realign the door so it swings clean. Putting a shim under the hinge might stop the scrape for a week, but it doesn’t fix the cause.
Could be either, and we’ll tell you which before we quote. A corner leak near the wall is usually a failed silicone joint between the enclosure’s wall channel and the tile, but it can also be a cracked grout line or a missing seal at the curb. We diagnose by running water along each joint, then quote the exact fix. A $15 tube of silicone applied wrong will leak again in six weeks, which is why we insist on proper joint prep before resealing.
Here’s what we quote for the most common Mr-Glass jobs in the Dallas market:
| Service | Typical Price Range |
|---|---|
| Frameless Glass Shower Enclosure Installation | $4,500 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Bathroom Remodel (including Mr-Glass enclosure) | $9,000 – $28,000 |
The spread comes down to glass thickness, panel count, hardware finish, and how much tile and substrate work is involved. The quote you get from us is a written number, not a range. Call (940) 204-5368 for an exact line-item estimate.
Book Your Mr-Glass Service in Dallas, TX
Call (940) 204-5368 to schedule a free estimate for Mr-Glass construction service in Dallas. We’ll give you a written price, a real arrival window, and a 365-Day Done Right Promise in writing. No voicemail maze, no callback limbo, just a person who answers and a number you can hold us to.
Written by Trevor Nash, Owner at Penhallow Remodeling Dallas, serving the Dallas area since our crew first brought Texas-grade remodeling experience to the North Texas market.
