A Penhallow company - serving Dallas, TX
An open living room and dining area after a whole-home remodel

ECO Window Systems Roofing Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Dallas
A whole-home remodel with the living, dining and kitchen areas opened up
A remodeled family room with new windows and a window seat
A remodeled primary suite with built-in wardrobes and a window seat
A remodeled staircase with wood treads and a slim metal railing
A finished basement family room with a media wall and wet bar
A remodeled hall bathroom with patterned floor tile and painted walls
A small remodeled galley kitchen with cabinets to the ceiling
A low-threshold walk-in shower with a bench and grab bar
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

ECO Window Systems Roofing: The Dallas Owner’s Guide

If you have an ECO Window Systems skylight, roof window, or integrated flashing kit that’s leaking, cracked, or failing at the seal, we stock compatible replacement parts in Dallas and can typically have the work done in one visit. Installed pricing for ECO Window Systems roofing repairs in Dallas runs $400 – $1,800 depending on whether we’re replacing flashing, a pane, or the full curb assembly. Most owners discover the failure the same way: a water stain on the ceiling after a hard north Texas thunderstorm, or a skylight that fogs between the glass panes and won’t clear.

Call (940) 204-5368

Which ECO Window Systems Models This Applies To

ECO Window Systems builds several roof window and skylight lines, and the parts are not all interchangeable. The fixed skylight units and the venting roof windows use different hinge assemblies, and the flashing kits are cut to match specific roof pitches – a flashing kit for a 3:12 pitch won’t seat right on a 6:12 Dallas roof. Before we order or pull a part, we check the identification label on the inside of the frame, which lists the model number, glass spec, and production date. If that label is faded or missing, we measure the visible glass and the curb dimensions to narrow it down. For ECO Window Systems specifically, we’ve found that aftermarket flashing kits from generic suppliers often sit 3 – 5mm proud of the original curb, which is enough to break the seal under Dallas heat cycling. OEM flashing or a supplier we’ve verified against the original spec is the safer call. We’re an independent service provider, not an ECO Window Systems dealer or affiliate, so we’ll tell you straight when OEM is the only sensible option and when a quality equivalent will hold up just as well.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Signs Your ECO Window Systems Roofing Is Failing

  • Ceiling stain or drip below the skylight. Most of the time this isn’t the glass – it’s the flashing or the curb seal. Dallas gets intense UV exposure, and the rubber gasket between curb and frame dries out and cracks faster here than in cooler climates.
  • Fog or moisture between the glass panes. The insulated glass unit has lost its seal. You can’t wipe this away; the condensation is inside the sealed space, and the pane needs replacement.
  • Visible cracks in the outer pane. Hail does this. Even a small crack compromises the glass’s structural integrity and will spread with every temperature swing, which Dallas gets daily in spring and fall.
  • Condensation on the interior frame in the morning. That’s usually a thermal bridge forming at the frame edge, which means the weatherstripping or the frame seal has degraded. Left alone, it leads to wood rot in the curb.
  • Difficulty opening or closing a venting roof window. The crank mechanism and hinge arms on ECO units wear unevenly when the unit isn’t operated regularly. Forced operation tends to bend the arm, and then the window won’t seat flush when closed.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A remodeled laundry and mudroom with a bench, cubbies and painted cabinets

For ECO Window Systems roofing work in Dallas, plan on $400 – $1,800 installed. A flashing replacement or single-pane swap lands at the lower end; a full curb rebuild with new insulated glass runs toward the top. Here’s the breakdown we give every homeowner before work starts:

  • Flashing kit: $150 – $450 in parts, plus 2 – 4 hours of labor
  • Insulated glass unit: $300 – $900 depending on size and coating
  • Crank and hinge assembly for venting units: $120 – $350
  • Curb rebuild (rot or structural damage): adds $500 – $900 in framing and sealing

You get a written price before we start – not a range, a number. The labor includes old-part removal, new-part installation, resealing, and cleanup. If the repair fails inside 365 days, we come back and fix it at no charge. That’s the Done Right Promise, and it’s on every invoice.

DIY or Call Us?

You can safely do two things before calling: check the interior frame for water trails that tell you where the leak enters, and photograph the ID label so we can pull the right part the first time. What we don’t recommend is climbing onto a Dallas roof to inspect or reseal flashing yourself. Roof pitch, heat-slicked shingles, and the tension involved in removing a mounted skylight make this a job for someone who does it regularly. We’ve also seen homeowners buy a “universal” flashing kit online, spend an afternoon fitting it, and then call us anyway when the first storm finds the gap. Give you a number before I pick up a tool – that’s the only way I know how to start. Call (940) 204-5368 and we’ll tell you what we think it needs and what it’ll cost.

FAQs

A built-in window seat in a bay window

Getting started with Penhallow in Dallas

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Dallas team

A local crew that works across Dallas and the towns around it, to the same written standard as every Penhallow location.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Dallas? Licensed & insured · Written quotes before work starts response · free estimates
Call (940) 204-5368
Local Service Coverage

Request a Free Estimate in Dallas

Tell us what you need - Penhallow Remodeling Dallas responds fast. No obligation.

By submitting this form, you agree to our Privacy Policy and consent to being contacted by call, text, or email regarding your project, including by the service partners who may complete the work.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch