Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cover Bathroom Remodeling: The Dallas Owner’s Guide
A full Cover bathroom remodel in Dallas typically runs $9,000 to $28,000 installed, depending on whether your Cover brand bathroom is a compact guest bath off a hallway in Richardson or a primary suite with a walk-in shower in a Highland Park ranch. That range covers complete gut-out and rebuild work: ripping out the old Cover surfaces, repairing any water damage behind them, and installing new tile, fixtures, cabinetry, and glass to factory-correct or better-than-factory spec. Most Dallas homes we see with Cover bathroom products were built between 1998 and 2012, which means the Cover components inside are now fifteen to twenty-five years old, and that age is exactly when grout lines start letting water through, caulk beads shrink, and shower pans develop hairline cracks that nobody notices until the ceiling below shows a stain.
We’re Penhallow Remodeling Dallas, and we are an independent service provider, not affiliated with Cover. That said, we have pulled apart, rebuilt, and upgraded enough Cover bathrooms across the Dallas area that we know exactly what holds up, what fails first, and what a realistic budget should be before the first tile comes off the wall.
Key Takeaways:
- Installed Cover bathroom remodel cost in Dallas: $9,000 – $28,000
- Typical failure points: shower pan cracks, grout failure, leaking valve seats, swollen vanity bases
- Most Cover bathrooms in Dallas are 15 – 25 years old and due for a full mechanical check
- We provide a written price before any work starts, plus a 365-Day Done Right Promise on the whole remodel
Which Cover Models This Applies To
Cover bathrooms don’t have one universal parts bin. The plumbing rough-ins, shower assembly, vanity mounting system, and pan construction changed across Cover’s production years, and pulling the wrong part means the new pan doesn’t meet the drain, the glass doesn’t line up with the curb, or the vanity sits proud of the wall by three-eighths of an inch. Before we quote anything, we check the rough-in depth on your drain line, the width of the shower curb as built, and whether your Cover bathroom used a fiberglass pan or a mortar-bed base. Those three measurements tell us which series you have and what the replacement actually requires.
The decision between OEM Cover replacement parts and quality aftermarket equivalents is straightforward for most Dallas homeowners. OEM Cover pans, trims, and glass have been largely discontinued for older series, and what does remain on the secondary market is often priced at three to four times what a comparable current-production part costs. We install quality aftermarket equivalents from brands we stand behind, including KraftMaid cabinetry, Cambria or Silestone quartz for vanity tops, and Kohler or Moen fixtures, all of which we order to your exact rough-in measurements. The honest truth from Trevor Nash: on a twenty-year-old Cover bathroom, factory replacement parts are almost never the smart money. The aftermarket has caught up and in many cases surpassed what Cover originally installed.
Styles & brands we work with
Signs Your Cover Bathroom Remodeling Is Failing
- Grout that keep darkening or flaking out along the shower floor. This means the slope on the original pan has settled or the pan itself has flexed, breaking the grout bond and letting water sit against the substrate (the water-resistant layer under the tile) instead of draining. In Dallas, our clay soil shifts enough that this is the most common first failure we see in Cover showers.
- A musty smell that won’t clear, or a stain on the ceiling of the room below. The pan or the shower curb has a crack you can’t see from above. By the time the smell arrives, the water has usually been traveling for weeks, and the fix means opening the shower base, not re-caulking.
- Caulk that cracks within a month of being redone. Caulk is not a structural material. If your bead keeps splitting, the pan is moving or the wallboard behind the tile is swelling, and the caulk is just the first thing to show it.
- A shower valve that drips or spikes temperature when someone flushes a toilet. The original Cover valve cartridges wear out and stop compensating for pressure changes. It’s a replace-the-cartridge job, but if the valve body itself is pitted or the rough-in is obsolete, you’re better off putting that money toward a full shower remodel with a new pressure-balanced valve.
- Vanity doors that swell at the bottom or drawer slides that bind. Moisture from a failing shower pan or a splash-back pattern that misses the sink edge is wicking into the cabinet base. Once the particleboard core in the original Cover vanity swells, no hinge adjustment saves it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Dallas, a complete Cover bathroom remodel runs $9,000 to $28,000 installed. A smaller hall bath with a tub-shower combo, a new vanity, a Kohler or Moen faucet set, tile surround, and new flooring typically lands in the $9,000 to $14,000 range. A primary bathroom with a larger walk-in shower, custom glass, a Cambria or Silestone quartz top, and higher-end tile can push into the $18,000 to $28,000 range. The biggest drivers are the condition of the subfloor when we open it up, whether you’re moving plumbing rough-ins, and the tile and glass selections. Cabinet line matters too: KraftMaid semi-custom runs more than a standard stock vanity but lasts longer and carries a better warranty.
Every quote we write includes the demolition, the plumbing and electrical work, the waterproofing, the tile, the fixtures, the glass, and the finish. We don’t hand you a number and then send a change order when we find a wet subfloor. We inspect the mechanical condition of the Cover bathroom and write the real price up front, including the repairs we can see coming. If we find something unexpected after demolition, we stop, we photograph it, and we put the revised number in writing before another dollar of work happens. Every remodel carries our 365-Day Done Right Promise: if the shower leaks, the tile cracks, or a drawer binds inside the first year, we come back and fix it at no charge.
DIY or Call Us?
You can safely check a few things yourself: run the shower for five minutes and look for water beading on the outside of the shower curb, press gently on tiles at the bottom of the shower wall to feel for movement, and inspect the ceiling below for any discoloration. Those checks tell us a lot before we even arrive. What you should not do is start pulling tile off a shower wall or prying up the pan to look for a leak. Shower demolition in a Cover bathroom means dealing with whatever condition the original waterproofing is in, and if the studs behind the tile are gone or the drain assembly is corroded, a partial fix simply doesn’t hold. We regularly see Dallas homeowners spend two weekends and several hundred dollars on a patch job that fails in six months because the root problem was the pan slope, not the visible crack.
If you’d rather have a clear answer than a weekend project, call us at (940) 204-5368. Trevor Nash will walk the job with you, explain what we found, and give you a number before a single tool comes off the truck. That’s the only way we know how to start.
FAQs
With proper waterproofing, a new mortar-bed or solid-surface shower pan, and correct ventilation, a rebuilt Cover bathroom in Dallas should give you twenty to thirty years of daily use. We install the same moisture-management details we’d put in a new build, which means the work outlasts the original fifteen-to-twenty-year lifespan of a production Cover bathroom in our humid North Texas climate. Call (940) 204-5368 if you want a direct assessment of what’s under your tile before you budget.
Sometimes. If the pan is a single-piece fiberglass unit with a hairline crack and the surrounding walls and subfloor are dry, a targeted pan replacement or a properly installed liner can work. If the pan has been leaking long enough to damage the substrate or the studs, a patch is throwing good money after bad. We’ll tell you which situation you’re in after we look at it, and either way you’ll get a written price. Call (940) 204-5368 to schedule a look.
A straightforward hall bath with no plumbing moves runs about three weeks. A primary bath with a walk-in shower, custom glass, and a quartz top can run four to six weeks depending on glass lead times and any surprises behind the walls. We quote you the schedule in writing along with the price, and we build in the same day window for material deliveries that we plan from the first walkthrough.
We stock the consumables we use on every remodel: waterproofing membrane, cement board, pan liners, valve cartridges, and the setting materials. Cover-specific OEM parts are generally special order because most original Cover bathroom components are discontinued; in nearly every case we install a current-production equivalent that fits the existing rough-in and carries a longer manufacturer warranty than the original part.
If your Cover bathroom is showing its age and you want a straight answer on what it’ll cost to fix it right, call (940) 204-5368 to schedule your free estimate. We’ll give you a written number, a written schedule, and a guarantee in writing before any work starts.
Written by Trevor Nash, Owner, Penhallow Remodeling Dallas at Penhallow Remodeling Dallas, serving Dallas and nearby areas.
