Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambria Kitchen Remodeling: The Dallas Owner’s Guide
If you have a Cambria kitchen surface that’s cracked, chipped, or delaminating at the seam, we can match it, replace it, or rework the surrounding cabinetry so the repair sits right. A full Cambria kitchen remodel in Dallas typically runs $14,000 – $45,000 installed, depending on cabinet line, countertop square footage, and whether we’re pulling out old tile or just refacing what’s there. Most owners discover the problem the same way: a hairline crack near the sink, a seam that’s started to separate, or a corner that crumbled when a pan clipped it.
We’re an independent Dallas remodeling company, not a Cambria dealer or affiliate. But we install Cambria quartz, we repair around it, and we’ve pulled enough of it out of kitchens across Dallas to know exactly how it behaves after a decade of Texas heat and holiday cooking. Trevor Nash and our crew will give you a number before we pick up a tool. That’s the only way we know how to start.
Which Cambria Models This Applies To
Cambria quartz is engineered stone, which means every design in their catalog shares the same core composition: roughly 93% natural quartz bonded with resin and pigment. So the compatibility question isn’t really about which pattern you have, it’s about which thickness and edge profile your slab was cut to. Cambria ships in 1cm, 2cm, and 3cm thicknesses. The 3cm slab is the workhorse in Dallas kitchens because it doesn’t require a plywood substrate (the support layer under the stone), while 1cm and 2cm slabs almost always sit on one.
Here’s the gotcha we run into constantly: if your Cambria countertop was fabricated with a laminated edge (a second strip glued under the front lip to make the stone look thicker), and that strip separates, you can’t just glue it back and call it done. The adhesive bond has failed, and any fix that doesn’t address the underlying seam will fail again within a season. We match Cambria by pattern name, lot number when available, and exact thickness. When a pattern has been discontinued, we walk you through quality alternatives from Silestone or Caesarstone that sit at the same price point and match your existing cabinets. You’ll get a straight answer about whether a true match is possible before you spend a dollar on demolition.
Styles & brands we work with
Signs Your Cambria Kitchen Remodeling Is Failing
- Hairline cracks near the sink cutout or cooktop. This is the single most common failure point we see in Dallas. Quartz expands under heat, and the thin strips at the front and back of a sink cutout are structural weak points. If you see a crack there, the slab is flexing where it shouldn’t be, usually because a cabinet below has settled or the original fabricator didn’t leave enough support.
- Seams separating or showing a dark line. Cambria seams should be nearly invisible. When one starts to open, moisture is getting in, and the seam adhesive is failing. In Texas humidity swings, a seam that’s stressed will grow every season until water reaches the substrate and the cabinets underneath start to swell.
- Corner chips that keep reappearing after repair. A corner that chips once is bad luck. A corner that chips twice in the same spot means the overhang is too deep or the support brackets underneath are undersized. Patching the stone without fixing the support is throwing money at a symptom.
- A dull, etched, or cloudy patch near the range. Cambria is non-porous and doesn’t etch like marble, but a focused burn from a hot pan set directly on the surface can discolor the resin. If the finish looks cloudy in one spot and it won’t polish out, the surface has been damaged beyond what a homeowner-grade polish can restore.
- Caulk joints cracking between the backsplash and the countertop. Your countertop and backsplash move at different rates when the house settles or the humidity swings. If the caulk keeps splitting, the two surfaces are fighting each other, and the joint needs to be properly cleaned, re-caulked with a commercial-grade silicone, and checked for movement.
Replacement Cost & What’s Included
Kitchen remodeling in Dallas with Cambria countertops lands between $14,000 and $45,000 installed. At the lower end, you’re looking at keeping your existing cabinet boxes, replacing doors and drawer fronts, and installing new Cambria on a modest-sized kitchen. At the upper end, you’re pulling everything to the studs, moving plumbing, rebuilding a kitchen island, and laying a Cambria run that wraps a wall. Countertop installation alone for Cambria runs $2,000 – $6,500 in our Dallas market, and that includes templating, fabrication, the slab, delivery, and install.
Every quote we write is a fixed line-item price, not a range. If the job goes sideways and we find rotted subfloor behind your dishwasher, we stop, show you what we found, and give you a written change order with a new number before we touch it. The price on day one is the number on the invoice, unless you ask us to change the scope. Our work carries a written guarantee, and if something fails inside the guarantee period, we come back and make it right at no charge. That’s the 365-Day Done Right Promise, and it’s on every project in writing.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can absolutely check a few things yourself before you pick up the phone. Look under the sink and see if the cabinet floor is soft or stained. Run your hand along the underside of the countertop overhang and feel for loose support brackets. Take photos of any cracks or separated seams from two angles so you can show us exactly what you’re seeing when we talk. None of that requires a contractor, and it helps us give you an honest number faster.
What you should not do is attempt to glue a separated seam, clamp a cracked slab, or grind down a chipped corner. Quartz fabrication is precise work. A homeowner-grade epoxy from the hardware store will yellow inside six months and fail at the worst possible moment, usually the week before you’re hosting Thanksgiving. The tools we use to polish Cambria properly run into the thousands, and the technique takes years. If you’re in Dallas and the damage is more than cosmetic, call us at (940) 204-5368. We’ll tell you over the phone whether it’s a repair or a replacement, and what each path costs in real dollars.
FAQs
Cambria itself carries a lifetime manufacturer warranty and, properly installed, the slab should outlast your cabinets. The realistic service life in Dallas is 20 to 30 years, with the failure points being the seams, the support structure, and the caulk joints, not the quartz itself. Call (940) 204-5368 and we’ll assess whether your issue is the stone or what’s under it.
Small chips and surface burns can be repaired by a fabricator with the right tools and color-matched resin, but a structural crack that runs through the thickness of the slab cannot be reliably repaired in place. The crack will continue to spread because the slab is still moving. For an honest assessment, call (940) 204-5368 and describe what you’re seeing. Estimates are free.
Countertop-only replacement runs three to five days from templating to install. A full kitchen remodel with new cabinets and Cambria countertops runs six to ten weeks in the Dallas market, with most of that timeline driven by cabinet lead times, not our labor. We give you a written schedule with a real arrival window before work starts, not after.
We don’t stock full Cambria slabs in a warehouse, because every kitchen is templated to fit. We work with Dallas-area suppliers to source the slab you need, and we carry the adhesives, caulks, support brackets, and substrates that a clean install requires on our trucks. When parts are needed for cabinets from KraftMaid or Kohler fixtures surrounding your Cambria, we can usually source those within days.
Call for a Free Estimate
If your Cambria countertop has failed or you’re planning a kitchen remodel in Dallas and want a written price before any work begins, call us at (940) 204-5368. A live person answers, day or night. We’ll schedule a visit, measure the job, and hand you a fixed number in writing. You’ll know exactly what you’re paying and what you’re getting before anything gets pulled or set.
Written by Trevor Nash, Owner, Penhallow Remodeling Dallas at Penhallow Remodeling Dallas, serving Dallas and nearby areas.
