Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Roofing: The Dallas Owner’s Guide
If you have a Boral roof in Dallas, you’re likely dealing with a cracked tile, a slipped underlayment patch, or a valley that’s started to leak after a hailstorm. We stock Boral-compatible replacement tiles and components for most models, and installed repair work in Dallas typically runs $400 – $2,500 depending on what failed and how much of the roof is involved. Most single-tile replacements or small repair jobs can be completed the same day we confirm the match.
The way most Dallas homeowners discover a Boral failure is unglamorous: a watermark on the ceiling after the March rains, a tile fragment in the gutter, or a neighbor mentioning “your roof looks different up there” after a windstorm. Boral roofs are some of the most durable concrete and clay tile systems on the market, but the Texas climate has a way of finding the weak joint, the dried-out flashing, or the one underlayment seam that wasn’t sealed right.
We’re an independent Dallas roofing repair provider, not affiliated with Boral. What that means for you: we tell you honestly whether the tile can be matched, what it’ll cost in writing before we start, and whether the rest of the roof is worth inspecting while we’re up there.
Which Boral Models This Applies To
Boral makes several distinct roof tile profiles, and they are not interchangeable. The main lines we see on Dallas homes include the Boral CedarLite (a flat, shake-style profile common on 1990s builds in Lakewood and Casa Linda), the Boral Villa and Riviera (rounded, Mediterranean-style concrete tiles), and the Boral Saxony Slate, which mimics dimensional slate on higher-end homes in North Dallas and Plano.
Each profile has its own tile dimensions, nose-to-tail length, and interlocking geometry. A CedarLite tile will not seat correctly on a Riviera batten. If someone tells you “a tile’s a tile,” call someone else.
To identify your tile, check the underside of a loose tile for the manufacturer stamp. If it’s painted over or missing, measure the exposed width and length and get us a photo of the profile from the side. The side profile gives us what we need to match it in about 30 seconds. For older Boral installations (pre-2005), the color lines have shifted, so expect a dye-match or a weatherable blend rather than a perfect factory match. Newer Dallas installations from 2010 onward are easier to match cleanly.
Styles & brands we work with
Signs Your Boral Roofing Is Failing
- Cracked or chipped tiles after a storm. Hail impact or a falling tree branch usually starts the crack at the tile edge. Once the structural integrity is gone, water sits against the underlayment below, and the clock starts ticking on the decking.
- Granules or tile debris collecting in gutters. Boral concrete tiles weather slowly, but spalling (the surface flaking off) means the tile has hit the end of its useful life. In Dallas, surface temps on a dark tile can exceed 140°F in August, which accelerates spalling on older tiles.
- A water stain or soft spot on the ceiling. By the time you see it inside, the underlayment has been breached. Boral tile roofs rely on a two-layer defense system: the tile sheds the bulk of the water, and the underlayment catches the rest. If the underlayment is compromised, the tile itself is just slowing the leak, not stopping it.
- Shifted or slipped tiles near the eaves. Dallas windstorms, especially along the I-30 corridor and the eastern suburbs, can lift tiles at the rake edges. A slipped tile often means the tile clip or screw has worked loose, and the wind will peel back the next tile behind it.
- Valley flashing that’s pulling away or corroded. The valleys in a Boral roof carry more water than any other spot. Old galvanized flashing in Dallas lasts 15 – 20 years before the zinc layer fails and rust pinholing begins. When you see flashing that’s no longer flat against the tile, you’re usually six months from an active leak.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Boral roof repairs in Dallas, here’s what our pricing looks like as of this season:
- Single tile replacement (matchable stock): $400 – $800 installed, including the tile, re-seating the clip, and checking the underlayment underneath.
- Multi-tile repair area (under 100 sq ft): $800 – $1,800, including underlayment patch if needed, new clips, and color blending.
- Valley or flashing replacement: $900 – $2,500, depending on valley length and whether we’re replacing just the metal or the mortar-bedded end caps too.
- Full underlayment spot repair over a leak zone: $600 – $1,400, including tile lift, underlayment replacement, and tile reinstall.
What drives the range: whether your specific Boral color is still produced, how much of the underlayment is involved, and whether we can trim tiles on-site or need to order from a regional Boral distributor. Steep pitches and two-story homes in areas like Highland Park or Lake Highlands add a labor factor as well.
Every quote is a written line item. You’ll see the tile cost, the labor cost, and exactly what warranty comes with it. Our 365-Day Done Right Promise covers the repair workmanship: if the repair fails inside a year, we come back and fix it at no charge. That’s not a verbal assurance; it’s in writing on every job.
DIY or Call Us?
Some things are safe for a homeowner to do: inspect the tile surface from a ladder, photograph the broken pieces, and clear the gutters. Those are helpful, and you should do them if you feel comfortable on a ladder.
What you should not do is walk a Boral roof to replace a tile yourself. Concrete tiles are load-bearing in a specific way, and stepping in the wrong spot will crack two more tiles for every one you’re trying to fix. The tile clips hold under tension, and a slip at the rake edge of a two-story Dallas home is not a recovery story worth risking. We get calls from homeowners who tried the YouTube route; the repair usually costs about three times what it would have if the first phone call had gone to us.
If you’re unsure whether you have a real problem or a cosmetic one, text us a photo. We’ll tell you honestly what we see and whether it’s worth scheduling an inspection. Or call (940) 204-5368 and ask for Trevor. Give you a number before we pick up a tool, that’s the only way we know how to start.
FAQs
A Boral concrete or clay tile roof in Dallas typically lasts 50 – 75 years, but the underlayment beneath it lasts 20 – 25 years in our climate. The tile may be fine while the waterproofing layer underneath has quietly aged out. That’s why we always check underlayment condition on every tile repair in Dallas, not just the visible surface.
Small hairline cracks can sometimes be stabilized with an elastomeric patching compound if the tile is still fully seated and not load-bearing. But any crack that runs the full length of the tile, any spalling at the surface, or any loosened clip means replacement. In Dallas, the temperature swing from summer heat to February freezes will open a patched crack again within a season or two. Call (940) 204-5368 and we’ll tell you which camp your tile falls into.
A single tile swap takes about an hour once we’re on the roof. A multi-tile repair with underlayment work usually takes half a day to a full day, and we’ll give you a real arrival window before we start. We don’t give vague “we’ll be there sometime” promises. When Trevor schedules a job, he quotes the window he’ll hit.
We keep a selection of the most common Dallas Boral profiles and colors on the truck, including CedarLite in its most-used colorways and several Villa blends. If your tile is a less common color or a pre-2005 profile, we source from a regional distributor, and that adds one to three days to the timeline. We’ll tell you that before you agree to anything, not after the roof is opened up.
If you need a Boral roof repair in Dallas, call or text (940) 204-5368 for a free estimate. You’ll get a real person on the line, a straight answer about what’s wrong, and a written price before any work starts. No change orders, no surprises. We also work with other trade brands you may know from your home: KraftMaid, Cambria, and Silestone.
Written by Trevor Nash, Owner, Penhallow Remodeling Dallas at Penhallow Remodeling Dallas, serving Dallas and nearby areas.
