Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Backsplash Installation Cost in Dallas?
Backsplash installation in Dallas typically costs between $800 and $2,500 for a standard kitchen, with most homeowners paying around $1,200 to $1,800 for tile materials and professional labor. The final number depends on your square footage, the tile you choose, and whether your existing wall needs prep work before the new backsplash goes up. That range covers a full job from Penhallow Remodeling Dallas, including materials, installation, and our written 365-Day Done Right Promise.
We give every homeowner a written price before any work starts. No verbal ballpark that drifts upward after demo, no surprise line items on the back end. The number you sign off on is the number on the invoice.
Backsplash Installation Cost Breakdown (2026)
Here’s what a Dallas backsplash job actually looks like, line by line. These are real working numbers we quote in kitchens across the metro – from Lakewood and M Streets down to DeSoto and Cedar Hill.
| Line Item | Typical Cost Range | What It Covers |
|---|---|---|
| Tile material | $4 – $18 per sq ft | Ceramic, porcelain, glass, or natural stone tile |
| Labor | $6 – $14 per sq ft | Surface prep, cutting, setting, grouting, sealing |
| Backer board / substrate repair | $150 – $400 | Replacing damaged drywall behind the tile |
| Grout and sealant | $50 – $150 | Grout, caulk, and sealer for the finished surface |
| Cleanup and haul-off | $0 – $100 | We leave the kitchen cleaner than we found it – included on every Penhallow job |
| Outlet and switch plate work | $10 – $25 per plate | Extending boxes so plates sit flush with new tile depth |
For a typical 30-square-foot backsplash behind a range and along the counter run, you’re looking at roughly $800 to $1,500 all-in with a mid-grade ceramic or porcelain tile. Step up to handmade-look zellige tile, glass mosaic, or a full slab backsplash cut from the same quartz as your counters, and you’ll land closer to $2,000 to $2,500 by the time the last tile is set.
What moves the price up or down matters more than the average. Square footage is obvious. But the bigger swing comes from tile choice – a $4-per-square-foot ceramic from a local Dallas tile house and a $18-per-square-foot Italian porcelain sit on opposite ends of the same wall. Wall condition is the sleeper cost. In older homes around East Dallas and Oak Cliff, we regularly find drywall that’s been cooked behind the range for twenty years. That wall needs to be cut out and replaced with backer board before tile goes up, and that honest prep work adds a few hundred dollars to the job. It’s the difference between a backsplash that lasts ten years and one that cracks behind the stove in eighteen months.
What Affects Backsplash Installation Pricing in Dallas
- Tile material and grade. Ceramic starts around $4 per square foot. Porcelain runs $6 to $12. Glass and natural stone like marble or travertine land between $10 and $18 per square foot in Dallas showrooms. The material cost alone can swing your total by $500 or more on a standard kitchen.
- Total square footage. A small between-counter filler backsplash of 10 to 15 square feet starts near the bottom of the range. A full-height backsplash running from counter to ceiling behind a 36-inch pro range, which we see frequently in newer builds around Frisco and McKinney, can double or triple the surface area.
- Wall condition and prep. Homes built before roughly 1990, common in neighborhoods like Casa View and Pleasant Grove, often have drywall that needs patching or full replacement before tile can bond properly. We charge for the prep we can see and tell you about anything we find before we touch the wall.
- Pattern complexity. Herringbone, basketweave, or vertical stack patterns require more cuts, more layout time, and more waste. A straight running bond is the most economical layout. A chevron pattern can add $200 to $400 in labor on a typical Dallas kitchen.
- Grout type and tile size. Large-format tiles go up faster. Small mosaic sheets take more time per square foot. Epoxy grout, which resists staining better around cooktops, costs more than standard cementitious grout but holds up longer against Dallas humidity and cooking grease.
- Access and job size minimums. A single backsplash wall is a small job by remodeling standards. Some contractors inflate small jobs to cover trip time. We don’t do that. We price the backsplash honestly, write the number down, and show up when we said we would.
Backsplash Installation Cost by Tile Type in Dallas
Here’s how the numbers break down by material, based on what we quote and install across the Dallas market in 2026.
- Ceramic tile: $800 – $1,400 total for a standard 30-square-foot backsplash. Entry-level budget without sacrificing durability. Glazed ceramic wipes clean with a sponge and handles range heat without discoloring.
- Porcelain tile: $1,100 – $1,800. Denser and more water-resistant than ceramic. Porcelain is the workhorse choice for Dallas kitchens that see daily cooking. It comes in finishes that convincingly mimic marble or concrete at a lower price.
- Glass tile: $1,400 – $2,200. Light-reflective and easy to clean, but unforgiving to install. Glass requires a flatter wall and more careful cutting. In kitchens with limited natural light, which Dallas ranch homes from the 1960s and 70s often have, a glass backsplash can brighten the whole room.
- Natural stone (marble, travertine, slate): $1,800 – $2,500. Stone needs sealing before grout and again after installation. It stains more easily than ceramic or porcelain, especially behind a cooktop. Beautiful, yes. But it asks more of you over time. We walk every homeowner through the trade-off before they commit.
- Full slab backsplash: $2,000 – $2,500 and up. Cut from the same Cambria, Silestone, or Caesarstone slab as your countertops for a continuous look with zero grout lines. The slab itself costs more, and installation requires precise templating. This is the top end of the backsplash market in Dallas.
Our installers work with tile and stone sourced from recognized trade brands and local Dallas suppliers. When we set a backsplash, we stand behind the installation with a written guarantee. When the material carries its own warranty, like Cambria quartz or Silestone, that protection layers on top of ours.
How Dallas Climate and Homes Affect Your Backsplash
Dallas sits in a climate zone that swings from 100-degree summers to occasional hard freezes. That thermal expansion and contraction matters for what goes behind your tile. Homes here also run the humidity gamut – older pier-and-beam houses in East Dallas breathe differently than slab-on-grade builds in North Dallas.
We bring this up because a backsplash that fails in Dallas usually fails for one of two reasons. First, the wrong substrate. We use cement board or an appropriate tile backer when the wall needs it, especially behind ranges where grease and heat bake the surface daily. Second, movement. If the backer board isn’t secured well or seams aren’t taped, hairline cracks show up in the grout within a season. That’s exactly the kind of failure our 365-Day Done Right Promise covers. If the work fails inside the guarantee period, we come back and fix it at no charge. That’s in writing on every project.
Backsplash vs. Full Kitchen Remodel: Where Does It Fit?
A backsplash is often the final piece of a kitchen remodel, and sometimes the only piece a homeowner wants. If you’re just replacing the backsplash around existing counters, budget $800 to $2,500. If you’re doing counters, cabinets, and backsplash together as part of a home improvement push, a full kitchen remodel in Dallas runs $14,000 to $45,000 depending on cabinet line, countertop material, and layout changes.
When we install a backsplash alongside new countertops, we coordinate the order so the counter installation is complete and templated first, then tile follows. That sequencing avoids gaps and misalignments between the slab and the tile line. It’s a detail that shows up in the finished look, and it’s one of the reasons homeowners call us for the full Backsplash Installation in Dallas package rather than piecing the work across contractors.
DIY Backsplash vs. Hiring a Dallas Pro
Tile looks forgiving on a YouTube video. In practice, a backsplash is a finish surface that sits at eye level in the most-used room of your house. Uneven grout lines, lippage between tiles, and crooked cuts at the counter or cabinet line are immediately visible. Every time you walk into the kitchen, you’ll see it.
We’ve been called to fix DIY backsplash jobs across Dallas. The fix usually costs more than hiring us the first time because we have to remove the failed tile, repair the wall, and start over. A professional installation with a written guarantee costs less than doing it twice.
The safety side is straightforward. Backsplash tile work involves cutting tools and, occasionally, work around electrical outlets, which means shutting off circuits and using caution near wiring. We handle all of that. Our technicians are background-checked and arrive in uniform, so you know exactly who’s walking into your kitchen.
How to Save on Backsplash Installation
Saving on a backsplash is about material choice and scope, not about cutting corners on labor. Here’s what actually works in Dallas.
- Choose ceramic or porcelain over glass or stone. You can cut the material cost by half or more without sacrificing durability. A glazed ceramic backsplash installed well looks sharp and cleans up easily.
- Keep the layout simple. Straight running bond with a standard 3×6 subway tile is the most economical pattern in labor. Herringbone and chevron look great but add hours of cutting.
- Limit the backsplash area. You don’t have to tile the entire perimeter. Behind the range and along the main prep counter gives you the functional and visual benefit at a lower square footage.
- Ask about timing. If we’re already in your home for countertop or cabinet work, adding the backsplash to that job is more efficient than a standalone visit. The combined job gives you one written price, one arrival window, and one guarantee.
- Get a written estimate before you commit. A free estimate from Penhallow Remodeling Dallas tells you the exact number. Call (940) 204-5368 and we’ll come measure, talk through tile options, and hand you a written price. No obligation, no pressure.
FAQs – Backsplash Installation Cost
How much does it cost to install a backsplash in Dallas?
Backsplash installation in Dallas costs $800 to $2,500 for a typical kitchen, with most jobs landing between $1,200 and $1,800 for materials, labor, and cleanup. The final number depends on tile choice, square footage, and wall prep. Call (940) 204-5368 for a free written estimate with an exact price for your kitchen.
What is the cheapest backsplash option that still looks good?
Glazed ceramic tile at $4 to $8 per square foot is the most affordable backsplash that still looks finished. A standard 30-square-foot installation with ceramic runs $800 to $1,400 in Dallas. We help you pick a ceramic that reads as high-end without the stone price tag.
Is it cheaper to repair or replace a backsplash?
Replacing a few cracked or loose tiles costs $150 to $300 for a small repair in Dallas. If the underlying wall is damaged or the tile is discontinued, a full replacement makes more sense at $800 to $2,500. We’ll give you an honest recommendation and a written price either way.
How long does backsplash installation take?
Most Dallas backsplash jobs take one to two days. Tile setting happens on day one, grouting and cleanup on day two. Larger or more complex patterns, like herringbone or full-height backsplashes, can run three days. We give you a defined arrival window before work starts and stick to it.
Can you install a backsplash the same week I call?
Often, yes. Smaller backsplash jobs can usually be scheduled within a week in Dallas depending on our project calendar and tile availability. A live person answers our phone 24/7 at (940) 204-5368, so you’ll get a real answer about scheduling when you call – no voicemail maze.
Get a Written Backsplash Price in Dallas
If you’re planning a backsplash in Dallas, the first step is a written estimate. Not a verbal range. Not a number that changes when the crew arrives. A written price on paper, covering materials, labor, prep, and cleanup, before any work starts. That’s the Kingswell standard we’ve operated under since 2004 – say the price before the work, show up in the window we gave, and leave the place cleaner than we found it.
Penhallow Remodeling Dallas is part of the Kingswell family of companies. Every backsplash we install carries the 365-Day Done Right Promise in writing. If the work fails inside the guarantee period, we come back and make it right at no charge. No service call, no re-inspection fee, no fine print games.
Call (940) 204-5368 today for a free backsplash estimate. A real person answers, and we’ll put a number in writing before you commit to anything.
Pricing reflects the Dallas market as of 2026. Penhallow Remodeling Dallas offers free estimates – call (940) 204-5368.
Written by Trevor Nash, Owner at Penhallow Remodeling Dallas, serving Dallas homeowners with written pricing and guaranteed workmanship.
What Our Customers Say
"Kitchen and dining room opened up into one space. They were honest about which wall could come down and which couldn't, no sugarcoating. Dust was kept way down with plastic everywhere."
- Oscar Benitez"Full home refresh before we sold. They were straight about what was worth doing and what wasn't to get our money back. On time, on budget, and it sold in a week."
- Monica Vaughn"We'd been burned by a contractor before who disappeared halfway. Penhallow finished on time and stood behind everything. The written price gave me peace of mind the whole way."
- Simone Clarke
