Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Roofing: The Dallas Owner’s Guide
Tremron roofing in Dallas typically runs $8,000 – $20,000 for a full replacement, while targeted repairs on Tremron tile or roofing components fall between $400 and $2,500 depending on what failed and how much roof area is involved. We stock Tremron-compatible roof tiles and the underlayment, flashing, and ridge components that go with them, and we can usually have a crew out to assess your roof within a couple of days. Most Dallas homeowners discover a Tremron issue the hard way: a ceiling stain after a heavy spring storm, a tile that slid out of place after high wind, or granules washing into the gutter after a hailstorm takes a pass at the roof line.
If you’re reading this, you likely already know the part that’s failing, or at least the symptom of it. What you need now is a straight answer on whether it can be matched, what it costs, and how fast it gets fixed. That’s what this page covers. Penhallow Remodeling Dallas is an independent service provider, not affiliated with Tremron, but our crews work on Tremron roofing regularly across the Dallas area, from Oak Cliff bungalows to newer builds near White Rock Lake.
Which Tremron Models This Applies To
Tremron manufactures concrete roof tile in a handful of profiles that show up all over Dallas: flat shake, barrel (also called mission or S-tile), and slate-look tiles. Each profile has a different physical footprint, and matching a replacement tile means knowing two things: the profile name and the exact tile length. Tremron tiles are typically 12 to 18 inches long depending on the series, and the wrong length will leave exposed decking or an awkward overlap that stands out from the street.
The OEM versus aftermarket decision is simpler with Tremron than with some brands. Because Tremron concrete tiles are mass-produced in standard colors and profiles, quality aftermarket tiles from manufacturers like Eagle or Boral often match within a shade or two, especially on roofs that have been in the Texas sun for five-plus years and have faded uniformly. For older roofs where the original color has shifted, we’ll recommend color-matching rather than relying on the original Tremron color code. The component that fails most often isn’t the tile itself: it’s the underlayment beneath it, which in Dallas heat and humidity degrades faster than the tile above. A 20-year underlayment can fail in 12 to 15 years here when exposed to repeated wet-dry cycles and attic heat.
Styles & brands we work with
Signs Your Tremron Roofing Is Failing
- Ceiling stains in upper-floor rooms: This usually means the underlayment under the Tremron tile has breached, and water is traveling along the roof deck to the first penetration it finds. The tile can look perfectly fine from the street while this happens underneath it.
- Tile fragments in gutters or on the ground after a storm: Concrete tile cracks when impact hits it, and a cracked tile won’t always slide out immediately. Dallas hail is the most common culprit, especially on south-facing roof slopes that take direct hits.
- A tile that shifted or sits crooked: Wind uplift can lift a tile enough to break the fastening point, leaving it sitting proud of its neighbors. One loose tile is a water entry point, and it becomes a missile in the next windstorm.
- Granular sediment in your gutters: Tremron tiles shed sand-like granules as they wear, but an unusual amount in one section of gutter points to a tile that’s spalling, or breaking down faster than it should.
- Visible gaps at ridge or hip lines: The ridge pieces have the most sealant exposure, and Dallas temperature swings cook that sealant brittle in a few years. A gap at the ridge lets wind-driven rain under the roof system.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Tile roof repair in Dallas runs $600 – $2,500 for a targeted fix involving a handful of tiles, flashing, or underlayment section replacement. A full Tremron roof replacement lands between $8,000 and $20,000 depending on roof size, profile complexity, and how much decking needs replacing once we pull the old tile off. Every quote we give is a written, line-item price before any work starts, so the number on day one is the number on the invoice.
The range moves up or down based on three things: how much roof area is involved, whether the profile is simple (flat shake) or labor-intensive (barrel tile with lots of cuts around valleys and hips), and what we find under the tile when it comes up. If the decking has been wet, that changes the scope, and we’ll show you exactly what we found before we write the change. The work itself carries our 365-Day Done Right Promise: if the repair fails inside a year, we come back and fix it at no charge, and that promise is in writing with every job.
DIY or Call Us?
Working on a roof with concrete tile means walking on tile that can crack under your weight, working at height, and disturbing the waterproofing system that keeps water out of your home. If the issue is a visually obvious single tile that’s cracked and you have a single-story, low-slope section, some homeowners choose to swap a tile themselves. We’ll be honest: if you’re on a ladder at the roofline, you’ve already exceeded what we’d call safe for the average homeowner. A wrong step through tile on a roof deck means a hospital visit, and a poorly seated tile means water damage that costs more than the service call would have.
What we’d rather see: if you spot something off, call us at (940) 204-5368. We’ll do a proper assessment, give you a written price before any work starts, and we’ll have a background-checked, uniformed technician on your roof, not you. Give you a number before we pick up a tool, that’s the only way we know how to start.
FAQs
Concrete tile itself can last 40 to 50 years, but the underlayment below it is the real clock in Dallas and typically needs replacement every 15 to 20 years in our climate. If you’re seeing leaks before year 15, the underlayment was likely underspecified or damaged during install. Call (940) 204-5368 for a roof assessment and we’ll tell you what your underlayment looks like before you spend tile money.
Small chips can be patched with a color-matched concrete repair compound, but a tile with structural cracks or one that has shifted from its fastening point should be replaced, not patched. A cracked tile will keep splitting along the fracture line. We stock common Tremron profiles to keep your repair to one visit, and we’ll tell you straight if a patch will hold.
A targeted tile replacement or flashing repair on a Tremron roof in Dallas usually takes half a day once we’re on-site, as long as the underlayment beneath is sound. If the underlayment needs a section replaced, plan for a full day including weatherproofing and re-setting the tile. We’ll give you a real arrival window before the crew shows up, and the price is written before we start.
We stock the most common Tremron flat shake and barrel profiles on our trucks, along with matching ridge pieces and underlayment, so most repairs are single-visit. Color-specific or low-volume profiles may need to be ordered, which adds a few days in Dallas. Call (940) 204-5368 and we’ll check our stock against your roof profile while you’re on the phone.
Written by Trevor Nash, Owner, Penhallow Remodeling Dallas at Penhallow Remodeling Dallas, serving Dallas and nearby areas.
