Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Bathroom Remodeling: The Dallas Owner’s Guide
If you have a Tremron bathroom product in your Dallas home and something has failed or worn out, we can source the matching component and install it correctly. A full Tremron-compatible bathroom remodel in Dallas typically runs $9,000 to $28,000 depending on scope, and a focused repair or part replacement usually lands well below that range. Most Dallas homeowners discover the problem mid-shower or mid-renovation: a crack in the tile, a pan that won’t drain right, or an edge that’s pulled away from the wall. The good news is that Tremron products are predictable to work with once you know the exact trim line and the age of the installation.
Penhallow Remodeling Dallas is an independent contractor. We’re not affiliated with Tremron, and we don’t pretend to be. We just work on their products regularly and know where they excel, where they fail, and what it costs to fix either one.
Which Tremron Models This Applies To
Tremron’s outdoor hardscape catalog is broad, but when their products show up inside a bathroom, it’s almost always one of three applications: precast shower pans, wall tile units, or threshold pieces that carry water from the shower base to the drain assembly. The model-specific catch in Dallas is that Tremron’s precast pan dimensions run a true 36 x 36, 36 x 48, or 48 x 48, and a lot of framed showers from the 2000s were roughed in at those nominal sizes. If you buy a pan without measuring the existing curb height and the drain offset from the back wall, you end up shimming the pan or re-doing the drain rough-in, and that’s where a $300 part becomes a $1,400 repair.
For any Tremron bath component, the first thing we check is the stamped code on the back or underside of the piece. Older Dallas installs often have a faded ink stamp that reads a series number like T-3 or T-4 followed by a two-digit year. If that stamp is gone, we measure the depth, the lip height, and the drain center, because Tremron changed their lip profile in the mid-2010s and mixing generations creates a visible seam at the threshold. OEM Tremron parts are obviously the safest match, but for discontinued series a quality aftermarket equivalent from a Texas masonry supplier can be every bit as good, as long as the dimensions are within an eighth of an inch and the material mix matches the original cement-to-fiber ratio.
Styles & brands we work with
Signs Your Tremron Bathroom Remodeling Is Failing
- Hairline cracks radiating from the drain collar. This is the most common failure we see in Dallas, and it’s almost always caused by uneven subfloor settlement or a pan that was set directly onto joists without a mortar bed. The cracks start small, but each shower cycle widens them as warm water expands the concrete.
- Water staining on the ceiling below the shower. By the time you see a stain, the pan has been weeping through a failed corner for weeks. In Dallas homes built before about 1995, the subfloor under the pan was often plywood over dimensional lumber, which means the water travels fast and the repair usually includes sistering a joist or two.
- A visible gap between the pan edge and the wall tile. Tremron pans expand and contract with the humidity swings we get in North Texas. When the original installer left no expansion joint at the perimeter, the pan pushes against the wall tile and one of them gives. Usually it’s the caulk line, sometimes it’s the tile.
- Loose or hollow-sounding wall tile near the shower corners. Once water penetrates the cement board substrate (the moisture-resistant layer behind your tile), the tile loses its bond and starts to move. What feels like one loose tile is usually a failing substrate that needs to be opened up and patched before the tile goes back.
- A sour, musty smell that doesn’t go away after the bathroom dries. Trapped water between the pan and the subfloor doesn’t dry out in a Dallas summer, not fully. It stays humid inside the floor cavity and feeds mold. By the time you smell it, the repair area is bigger than you’d hoped, but not bigger than we can handle.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A Tremron pan replacement or threshold repair in Dallas usually falls between $1,800 and $4,500 installed, including the new pan or component, demolition of the old piece, subfloor inspection and leveling, new mortar bed, drain collar set, and grout or sealant to match. If the repair comes as part of a larger bathroom remodel, the full project range is $9,000 to $28,000, which covers waterproofing, tile work, fixture installation, and finish trim to our written scope. What changes the number most is subfloor damage. If the joists are sound, you’re at the low end. If they’re not, we sister them before we set the new pan, and that work gets line-itemed in the written price so you see exactly what you’re paying for.
Every Tremron-related job we do in Dallas gets the 365-Day Done Right Promise in writing. If anything we installed fails within that first year, we come back and fix it at no charge. That’s not a verbal nod, it’s a line on the page that you sign and we sign.
DIY or Call Us?
You can do the diagnostic work yourself: run your hand along the pan edge to feel for lift, shine a flashlight under the bathroom cabinet to look for water trails, and check the grout lines around the drain with a flathead screwdriver for soft spots. Those findings help you describe the problem accurately when you call.
Where DIY goes wrong with Tremron bathroom components is in the removal. A precast pan set in mortar doesn’t lift out cleanly, and prying it the wrong way chips the surrounding tile or cracks the drain pipe below. That turns a straightforward swap into a plumbing call and a tile patch. It’s also heavy, awkward work in a tight space, and a dropped pan corner to an unguarded foot is a real injury. If the failure is a loose tile or a cracked corner and the pan itself is sound, that’s a repair we can often handle in a day. Give us a call at (940) 204-5368 and describe what you’re seeing. We’ll tell you straight whether it’s a homeowner fix or a truck-roll job, and if we come out, you’ll know the price before we touch the shower.
FAQs
A properly installed Tremron precast pan lasts 15 to 25 years in a Dallas home, but the original mortar bed and the waterproofing underneath are the real clock. North Texas clay soil shifts seasonally, and the homes that hold up best are the ones where the subfloor was leveled and reinforced before the pan went in. If the pan itself is cracked, it’s almost never the pan’s fault; it’s what’s underneath it.
Small hairline cracks away from the drain can sometimes be epoxy-injected and sealed, and we do that repair when the crack is under a quarter-inch wide and the pan hasn’t moved. But a crack that runs through the drain collar or shows displacement at the edges means the structural bed below has failed, and patching the surface just buys you six months. The honest answer depends on the crack, and the way to know is to look at it. Call (940) 204-5368 and we’ll come assess it for free.
Most straight replacements in Dallas take one to two working days: demolition and subfloor inspection on day one, new pan set with the mortar bed curing overnight, and drain assembly plus sealant on day two. If the subfloor needs sistering or the waterproofing membrane has to be extended up the wall, add a day. We give you the schedule in writing before work starts, and that’s the schedule we hit.
We stock the common Dallas market items: standard 36 x 36 and 36 x 48 pans, threshold pieces, drain collars, and the matching sealants. Uncommon Tremron series or older discontinued profiles we source directly from Texas masonry supply houses and typically have in hand within three to five business days. We also regularly work with parts for KraftMaid, Cambria, and Silestone bathroom installations, so if your vanity or counter failed alongside the Tremron piece, we can scope the whole job in one visit.
If the answer to your question isn’t here, call (940) 204-5368. A real person answers, and you’ll get a direct answer, not a voicemail.
Written by Trevor Nash, Owner, Penhallow Remodeling Dallas at Penhallow Remodeling Dallas, serving Dallas and nearby areas.
