Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Fence Installation: The Dallas Owner’s Guide
Barrette fence installation in Dallas typically runs $3,500 – $9,000 for a full replacement or major section repair, depending on linear footage, post condition, and whether we’re matching an existing gate or hardware set. We stock Barrette-compatible rails, pickets, post caps, gate frames, and hardware on our trucks, so most jobs are quoted and started within days, not weeks. The usual discovery is unglamorous: a post leans after a storm, a gate drags against the latch side, or a bottom rail rots where the sprinkler has been hitting it every other morning. Once someone sees the wobble, they start reading the labels on the old parts and realize they have a Barrette fence and no idea which Barrette fence. That’s the page we wrote this for.
Which Barrette Models This Applies To
Barrette Outdoor Living produces several residential vinyl and aluminum fence lines sold across North Texas, including their classic solid vinyl privacy panels, semi-private spaced picket styles, and aluminum ornamental grades. The compatibility gotcha we run into most often in Dallas: Barrette vinyl rails are not a universal extrusion shape. A rail from their privacy line won’t seat into a post from their spaced-picket or ranch rail line, even if both are white and both came from the same store. We match the part by measuring the rail face width and wall profile, and we look for any embossed or printed lot code on the bottom rail or post skirt. For older Barrette aluminum fences, the post wall thickness ranges roughly 0.062″ – 0.125″ depending on whether it’s residential or light commercial grade, and that changes which gate hinge bracket and post base we order. Barrette also makes composite and wood-privacy systems under separate labels; we do not assume any wooden part is theirs without a stamp or receipt.
OEM Barrette parts available through their dealer network in Dallas get you the exact color and finish, and that matters more than most people think: Dallas sun fades certain white vinyl profiles faster than off-white aftermarket replacements, and the result is a two-tone fence line. We use OEM parts whenever color matching is visible, and let you choose a quality aftermarket equivalent only where it’s an internal component like a stiffener, gate wheel, or hidden post insert. Penhallow Remodeling Dallas is an independent contractor, not a Barrette factory or authorized warranty station, but we have been replacing their fences long enough to know which parts genuinely interchange and which ones claim to.
Styles & brands we work with
Signs Your Barrette Fence Installation Is Failing
- Post lean or wobble at the ground line. In Dallas’s clay-heavy soil, this usually means the post wasn’t set deep enough for our freeze-thaw and shrink-swell cycles, or the concrete collar was poured too shallow. Barrette posts are engineered for wind loading; when they lean, it’s almost always the foundation, not the post.
- Gate dragging or latching only when you lift it. This is the hinge bracket or the gate frame sagging under its own weight. Vinyl gates over about five feet wide need a metal stiffener or cable system; if the original install skipped that, the gate pulls itself out of square and eats the latch.
- Rails slipping out of the post or “bowing” sections. Barrette rails are notched into the post with a locking tab; if a rail end cracks or the tab shears, the whole panel loses structural tension. You’ll see the rail droop and the pickets start to flutter in the wind.
- Bottom rail rot or cracking where the grass meets the fence. Sprinkler overspray and weed-trimmer damage are the biggest culprits in Dallas. Once water gets inside the rail channel, it sits there; vinyl doesn’t rot, but internal mold and freeze expansion can warp the profile from the inside out.
- Panels leaning in one direction like a row of dominoes. This means the anchors or post bases have failed uniformly, and it’s a structural replacement, not a cosmetic one. In older Dallas neighborhoods with expansive soils, we see entire fence lines racking out of alignment after several wet-dry seasons.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Barrette fence installation in Dallas, a typical full replacement runs $3,500 – $9,000 installed. The spread mostly comes down to linear footage, post depth and diameter, gate count and gate width, and whether we are reusing an existing concrete footing or digging fresh posts. A 50-foot run with one gate is fundamentally different from a 180-foot perimeter with three gates and an ornamental top rail.
What we include in the written price, always: removal and haul-off of old fence material, post hole digging to code depth (below the local frost line and into stable soil), new concrete footings, all Barrette-compatible rails, posts, pickets, caps, and hardware, gate mounting and alignment, and a final walkthrough with you. We quote OEM parts at dealer cost where possible, and we write the parts line separate from the labor line so you can see exactly what the materials cost. No change order appears on site unless you ask us to expand the scope. The work carries our 365-Day Done Right Promise: if the fence shifts, the gate drags, or a rail separates inside a year, we come back and fix it, no service call fee, no re-inspection fee, and no argument about who did what.
DIY or Call Us?
You can safely do a few things before calling us. Check for sprinkler heads spraying directly onto the fence line. Look for tree roots lifting a post. Note which way the gate swings and whether the hinge screws look loose or the bracket itself is cracked. Those are diagnosis steps, not repairs, and they help us quote you faster. What you should not do is attempt to remove a vinyl post with a pickaxe and a pry bar after watching a thirty-second clip. A split post that is still under tension from the adjoining rails can kick back, and the concrete collar often weighs more than the post itself. We have pulled more than one homeowner out of a job that started as a “quick panel swap” and ended with a snapped rail and a hole the size of a wheelbarrow. For Barrette fence installation in Dallas, call (940) 204-5368 and we’ll give you a written price before any digging starts.
FAQs
A properly installed Barrette vinyl fence in Dallas lasts 20 – 30 years; the constraints here are soil movement and UV exposure, not the vinyl itself. Aluminum Barrette systems last longer in terms of material but need hardware replacement and post re-alignment checks every several years.
Yes, and we repair far more than we replace. If the posts are sound and only a rail or gate section failed, the repair is typically well under $1,500, and we do not rebuild a fence that doesn’t need it. Call (940) 204-5368 and we’ll tell you which one yours is.
A standard Dallas backyard replacement with one gate takes two to three working days from first hole to final post cap, weather permitting. If we’re matching an existing line and the concrete has already set, we can sometimes finish the panel installation in a single day.
We stock common Barrette vinyl rails, pickets, post caps, gate hinge brackets, and gate frames on our trucks. Unusual profiles or oversized posts may take one to two business days to pull from the local Dallas supplier, and we include that lead time in the written quote.
Written by Trevor Nash, Owner, Penhallow Remodeling Dallas at Penhallow Remodeling Dallas, serving Dallas and nearby areas.
