Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Roofing: The Dallas Owner’s Guide
We stock and install Barrette-compatible roofing products across Dallas, with most replacement jobs running $400 – $1,800 depending on the part, the roof pitch, and how much decking needs to come up. If you’ve got a Barrette product that’s cracked, lifted, or leaking, we can usually match it and have it on the truck within a day or two. Most Dallas homeowners find out a part failed the hard way: a water stain on the ceiling after a spring storm, granules piling up in the gutter, or a shingle tab flapping after a north Texas wind gust.
We’re an independent contractor, not a Barrette dealer or affiliate. That means we tell you straight when an OEM part is worth the wait and when a quality aftermarket equivalent does the same job for less.
Which Barrette Models This Applies To
Barrette manufactures under several roofing lines, and the part that fits one line won’t always fit another. The most common we see in Dallas are the Cedar Shake, Slate, and standing-seam metal profiles, along with their ridge cap and hip/ridge accessory lines. If you don’t know which line you have, check the original contract or look for a stamp on the underside of a loose shingle. Most Barrette products carry a molded-in code near the nailing strip.
The gotcha that trips up a lot of Dallas homeowners: Barrette’s ridge caps and hip caps changed profile dimensions between manufacturing runs. A cap from one year can sit a quarter-inch proud of the field shingles from another, which leaves a gap for wind-driven rain to work into. We measure the cap’s profile and the field tile’s exposure before we order, because guessing here means a second trip and a second charge. For discontinued colors, we’ll match with a quality aftermarket equivalent and tell you the specific brand and part number before we install it, not after.
Styles & brands we work with
Signs Your Barrette Roofing Is Failing
- Curling or lifting shingle tabs. North Texas heat cycles bake the adhesive strip until it releases. Once tabs lift, the next spring storm peels them back and exposes the nails beneath.
- Granule loss collecting in gutters. Barrette’s asphalt lines shed surface granules as the UV rays break down the binder. A steady trickle of dark grit at the downspout means the shingles’ protective layer is nearly gone.
- Water staining on ceilings or in the attic. This is usually a failed underlayment seam or a broken seal at a penetration, not a shingle problem. The shingles look fine; the water got in underneath them.
- Cracked or missing hip/ridge caps. Caps take the brunt of Dallas wind because they sit on the roof’s highest point with no field shingles bracing them. Once one goes, the next storm pulls its neighbors.
- Warped or bulging decking visible from the attic. This means water has been sitting on the OSB or plywood long enough to delaminate it. By the time you see it, the repair involves more than the shingle above it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Dallas homeowners, Barrette roof repairs typically run $400 – $1,800, and full replacements run $8,000 – $20,000. The repair range covers most single-area fixes: replacing a section of cracked caps, resealing lifted tabs, swapping out a handful of damaged shingles, or repairing a valley that’s opened up. The number climbs when the decking underneath has rotted, when the pitch is steep enough that we need harnesses and toe boards, or when the Barrette color you need is discontinued and we have to order a matched batch instead of pulling from stock.
Every job gets a written price before work starts. That number includes the parts, the labor, the disposal of torn-off material, and our 365-Day Done Right Promise: if the repair fails inside a year, we come back and fix it at no charge. No service call fee, no re-inspection charge. That promise is in writing on every invoice.
| Barrette Roofing Service (Dallas) | Typical Installed Range |
|---|---|
| Small repair (few shingles, cap section, seal strip) | $400 – $900 |
| Moderate repair (valley rebuild, underlayment patch, multiple caps) | $800 – $1,800 |
| Full roof replacement (Barrette or matched equivalent) | $8,000 – $20,000 |
DIY or Call Us?
You can safely do two things from the ground: photograph the damage with a zoom lens so you know what you’re describing, and clear debris from gutters and downspouts between rain events. That’s where the DIY ends for Barrette roofing. Working on a pitched roof without fall protection is the leading cause of roofing injuries in Texas, and prying up shingles to “take a look” usually turns a $500 repair into a $2,500 redeck because you’ve broken the seal on surrounding shingles and let water underneath.
If the part failed because of a storm, document everything with photos and call us at (940) 204-5368. We’ll give you a written price before we touch the roof, arrive in the window we gave, and stand behind the repair for a full year.
FAQs
Barrette’s asphalt shingle lines typically last 15 – 20 years in the Dallas climate, though Texas sun and hail shorten that to 12 – 18 years on unshaded south-facing slopes, while their metal lines can go 30 – 40 years with clean seams and intact fasteners. The adhesive strips and granule coating fail first, not the shingle substrate. Call (940) 204-5368 if you’re seeing bare fiberglass or lifted tabs, because that’s the signal the roof is in its final years.
Yes, if the damage is contained to one area and the surrounding shingles still have their granule coating and adhesive strip intact. We’ve repaired Barrette caps on older Dallas homes a dozen times over without replacing the field. If the decking is soft or the damage covers more than about 30% of a slope, replacement is usually the better call. We’ll tell you which and write the price down before you decide.
Most Barrette repairs take 2 – 4 hours on site once the parts are in hand, assuming dry weather and no hidden decking damage. Full replacements run 1 – 3 days depending on the roof’s complexity and the crew’s staging access. We schedule the job for the full window, not just the part you can see from the street.
We stock common Barrette cap profiles, sealants, underlayment, and fasteners on the truck, and we order color-matched field shingles from our Dallas suppliers as needed, usually arriving within a day or two. Discontinued colors take longer because we source from aftermarket batch matches. If you’ve got a loose shingle or a cap you saved from the original install, keep it; it makes the color match exact.
Written by Trevor Nash, Owner, Penhallow Remodeling Dallas at Penhallow Remodeling Dallas, serving Dallas and nearby areas.
