Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Kitchen Remodeling: The Dallas Owner’s Guide
ES Windows kitchen remodeling in Dallas typically runs $14,000 – $45,000 depending on cabinet line, countertop material, and how much of the existing kitchen is salvageable. We stock ES Windows-compatible hardware and components on our trucks, and we can usually match your window or door part from a photo and a measurement within one visit. Most Dallas homeowners discover they need us when a kitchen window that’s part of the remodel plan won’t close square, has a failed seal, or simply doesn’t match the cabinet layout they’ve already paid a designer to draw.
Here’s the honest picture: ES Windows products are built for coastal climates first, which means Dallas heat and humidity cycles stress them differently than they’d be stressed in, say, Long Beach. We see the same three failures repeat across North Dallas, Lakewood, and the Park Cities: sash balances that give out after years of thermal expansion, weatherstripping that goes brittle in 100-degree attic-adjacent walls, and glass packs that fog when the desiccant inside the spacer bar gets saturated. None of these are catastrophic. All of them matter when you’re spending five figures on a kitchen remodel and the window over the sink is part of the plan.
Key Takeaways
- ES Windows kitchen remodeling in Dallas: $14,000 – $45,000 installed.
- We’re an independent Dallas contractor, not affiliated with ES Windows, but we match their parts and specs correctly.
- Written price before any work starts, and a 365-Day Done Right Promise on every job.
- Call (940) 204-5368 and a real person answers, any hour.
Which ES Windows Models This Applies To
ES Windows makes several series lines, and part compatibility is not universal across them. The most common ones we encounter in Dallas kitchens are the ES 900 Series (aluminum frame, often paired with older track homes), the ES 700 Series (vinyl, common in 1990s and early 2000s builds in Richardson, Garland, and Mesquite), and the ES 5700 Series (their newer vinyl line showing up in remodels around White Rock Lake and Lake Highlands). A balance shoe from a 900 Series will not seat correctly in a 700 Series, even if the measurements look close. That’s the kind of compatibility gotcha that causes a $12 part to become a $400 callback when someone guesses wrong.
To identify your window, look for the etched code in the corner of the glass or on a sticker along the top of the sash. It usually starts with “ES” followed by a series number and the manufacturing date. If the sticker’s long gone, measure the visible glass height and width, then the frame thickness. We can match most units from those two numbers plus a photo. For older ES Windows products no longer in active production, we source quality aftermarket equivalents that meet or beat the original spec; for newer lines, we order OEM when availability in the Dallas area allows. We also stock and install matching parts for KraftMaid and Wellborn cabinetry, along with Cambria and Silestone countertops, so the window work doesn’t derail the rest of the kitchen schedule.
Styles & brands we work with
Signs Your ES Windows Kitchen Remodeling Is Failing
Here’s how Dallas homeowners usually figure out their ES Windows product has a problem before the remodel even starts:
- The sash won’t stay up when you open it. That’s a failed balance system, typically the balance shoe or the spiral rod inside the side jamb. In Dallas, the repeated expansion and contraction from summer attic heat to winter cold snaps wears these out faster than the manufacturer’s coastal testing predicts.
- Condensation between the glass panes. Once the seal around the insulated glass unit fails, the desiccant inside the spacer bar saturates and can’t absorb any more moisture. You end up with permanent fog between panes that no amount of cleaning fixes. We see this constantly in kitchens over the range, where steam and grease accelerate the seal breakdown.
- You can feel a draft or see daylight around the sash. Usually the weatherstripping has turned brittle and cracked, or the frame itself has shifted slightly out of square as the Dallas clay soil moves beneath the slab. Either way, you’re losing conditioned air right beside the spot where you cook.
- The lock or keeper doesn’t engage fully. When the window won’t close tight enough to lock, the culprit is often a worn cam or a misaligned keeper plate. It’s a small part, but it’s also the difference between a window and a security gap.
- The window is hard to open at all, and the crank or sash handle flexes when you force it. That’s mechanical wear, usually a stripped gear in the operator or a swollen jamb. Forcing it is how a $40 hardware replacement becomes a broken glass unit and a bigger bill.
Replacement Cost & What’s Included
Installed ES Windows-compatible kitchen remodeling parts in Dallas range based on what’s actually wrong. A single sash balance replacement runs $180 – $400 installed. A full insulated glass unit swap runs $450 – $1,200 per window. Weatherstripping and hardware refresh runs $150 – $350 per opening. When we’re doing a full kitchen remodel that includes window work, the window portion typically lands between $2,000 and $8,000 of the total project, integrated into the overall $14,000 – $45,000 kitchen budget.
What drives the number: window size, series compatibility (older 900 Series parts are harder to source than current 5700 Series), whether the sash has to be removed and re-glazed, and how accessible the window is from the exterior. You get a written line-item quote before any work starts, so the price on day one is the price on the final invoice. No change orders, no “we discovered additional issues” markup. The 365-Day Done Right Promise is in writing on every project: if the part or the install fails inside the guarantee period, we come back and fix it at no charge, including a free second visit.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things yourself before picking up the phone. Clean the tracks with a dry brush, look for obvious cracked weatherstripping, and check whether the problem is one window or every window on that wall. Those observations help us bring the right parts on the first trip.
What you should not do is pull a sash balance out of the jamb, try to re-spring a spiral rod, or attempt to replace a glass pack. Sash balances hold tension, and that tension is invisible right up until it isn’t. A balance that lets go under load can take a chunk of finger with it. We’ve also seen homeowners crack an insulated glass unit trying to reinstall a sash they removed without help. That turns a $300 fix into a $900 replacement. If you’re in Dallas and you’re not sure, call (940) 204-5368. We’ll tell you over the phone whether it’s something you can handle or something we should come look at, and the estimate is free either way.
FAQs
In our experience, ES Windows balances, weatherstripping, and glass seals in Dallas kitchens last 8 – 15 years before something gives, which is shorter than coastal installations because of the extreme temperature swings and the heat load from cooking. If your windows are 10 years old or more and you’re remodeling the kitchen anyway, we recommend replacing all window hardware and seals in one pass. Call (940) 204-5368 and we’ll assess yours honestly, for free.
Some parts can be repaired, others can’t. Balance shoes and weatherstripping are replaceable components, but a failed insulated glass unit cannot be re-sealed, it gets a new glass pack. The good news is we rarely need to replace the whole window frame unless it’s physically damaged or severely out of square. Call (940) 204-5368 for a straight answer on your specific window.
A single balance or weatherstripping replacement takes 45 – 90 minutes once we’re on site. A full glass pack swap takes 2 – 3 hours including cleanup. If the window work is part of a larger kitchen remodel, we schedule it to dovetail with the cabinet and countertop phases so you’re not living with a torn-up kitchen any longer than necessary. Call (940) 204-5368 for a schedule estimate that accounts for your full project.
We stock common balance shoes, weatherstripping profiles, and hardware for ES Windows 700 and 5700 Series on our trucks in Dallas. Older 900 Series parts and custom insulated glass units are ordered per job with a 5 – 10 business day lead time. Either way, you know the price before we order anything. Call (940) 204-5368 and we’ll tell you if your part is on the truck today.
Contact Penhallow Remodeling Dallas
If you’ve got an ES Windows product that needs attention as part of a kitchen remodel in Dallas, or you’re starting a kitchen project and don’t want the windows to be the weak link, call us at (940) 204-5368. We’ll give you a written price before any work starts, a real arrival window, and the 365-Day Done Right Promise in writing. That’s how we’ve always worked, and Trevor Nash wouldn’t start a job any other way. Give you a number before I pick up a tool, that’s the only way I know how to start.
Written by Trevor Nash, Owner, Penhallow Remodeling Dallas at Penhallow Remodeling Dallas, serving Dallas and nearby areas.
