Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Fence Installation: The Dallas Owner’s Guide
Tamko fence installation in Dallas typically runs $3,500 to $9,000 for a full residential perimeter, with most falling between $4,500 and $7,500 depending on linear footage, gate count, and whether we’re pulling old posts or setting new ones. We install Tamko composite and vinyl fence systems, and we stock the common rails, pickets, post caps, and gate hardware on our trucks, so most repairs and partial replacements happen in a single visit. What usually brings a Dallas homeowner to this page is a gate that won’t latch after a storm, a run of pickets that cracked along the top rail, or a post that’s leaning after heavy clay soil shifted through a wet spring.
Which Tamko Models This Applies To
We work with Tamko’s composite fencing lines most often, but the same installation principles and hardware carry over to their vinyl fence systems. The compatibility gotcha most Dallas owners run into is post spacing: Tamko’s rails are pre-routed at specific intervals, usually 6 feet or 8 feet on center, and if an old wood fence had posts at 7 or 9 feet, the rails won’t seat correctly without setting new posts. That’s the most common reason a “simple swap” turns into a larger job. When we arrive, we check the label on the back of a picket or the underside of a rail for the series code, then match rails to existing posts or reset posts to the manufacturer’s spacing. For Tamko specifically, we recommend OEM rails and pickets when the fence is under ten years old, because aftermarket extrusion profiles can vary by an eighth of an inch, and that gap shows up at every seam. On older fences, a quality aftermarket post sleeve or gate frame can extend the life of the existing run without paying the OEM premium.
Styles & brands we work with
Signs Your Tamko Fence Installation Is Failing
- Gate sag at the latch side. The hinge post has shifted or the gate frame has worked loose at the corners. In Dallas clay, posts set in shallow concrete or with fast-set foam lean within two to three seasons.
- Pickets cracking near the top rail. This is thermal expansion stress. Composite and vinyl both move with North Texas temperature swings, and if the original installer screwed the pickets tight to the rail with no room to float, the pickets crack at the fastener line.
- Rails bowing between posts. Undersized rails or posts spaced too far apart for the wind load. A 6-foot privacy fence in Dallas sees real wind, and a rail that’s flexing now will snap at the pocket the first time a storm pushes it hard.
- Post lean with visible soil gap at the base. The post wasn’t set deep enough for our expansive clay. Dallas soil contracts in summer drought and expands in spring rain, and a shallow-set post walks right out of level over two years.
- Hardware corrosion at gates and post caps. Exposed steel fasteners in a humid climate rust and seize. The gate still works, but the hardware is eating the material around it. Once the post cap is corroded through, water gets into the post and the freeze cycle does the rest.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full Tamko fence installation in Dallas lands between $3,500 and $9,000. The spread comes down to linear footage first, then gate count, then what’s happening below grade. A straight 60-foot run with one gate and clean post removal sits near the bottom of the range. A 200-foot perimeter with two gates, old concrete footings to break out, and a fence line that follows a slope pushes toward the top. Our quote includes removal and haul-off of the old fence, new posts set in concrete at the correct depth for Dallas frost and clay movement, the Tamko rails, pickets, post caps, and gate hardware, and a written warranty on the installation. That’s the Kingswell standard that’s been in place since 2004: the written price we hand you before work starts is the price you pay, and if anything fails within 365 days, we come back and fix it at no charge. No change orders, no “we found something” surprises. Trevor Nash has been giving straight estimates for years, and the rule hasn’t changed: give you a number before I pick up a tool, that’s the only way we know how to start.
DIY or Call Us?
A homeowner can safely check a few things before picking up the phone. See if the gate latch still aligns when you lift the gate by the handle. Check whether pickets have visible gap room at the top rail. Look at the base of each post for a widening dirt gap. Those observations help us quote accurately over the phone. What we don’t recommend is pulling a post and resetting it yourself. The post is the structural anchor, and a reset that’s three inches too shallow or mixed too dry fails the same way the first one did, only now you’ve spent a Saturday and the fence is leaning by fall. Gate frames under tension are another spot where a homeowner can get hurt; the spring and hinge load on a full-size gate is not something to fight alone. For most Tamko fence work, the safe move is a free estimate and a written number. Call us at (940) 204-5368 and we’ll send a technician who knows Tamko spacing and Dallas soil.
FAQs
A correctly installed Tamko composite or vinyl fence in Dallas lasts 20 to 30 years before materials degrade, though gates and hardware typically need attention around year 10. Post depth and drainage matter more than anything else in our clay soil. If you’re planning a Tamko fence installation, proper post setting is the difference between a fence that lasts decades and one that leans in five years. Call (940) 204-5368 and we’ll quote the job with posts set right for Dallas conditions.
Yes, in most cases we can repair a Tamko fence by replacing affected rails, pickets, or gate hardware rather than doing a full teardown. The deciding factor is usually the posts: if the posts are sound and properly spaced, a section repair makes sense. If posts are leaning or set at wrong spacing, partial work just delays the full job. We’ll tell you which one you’re looking at when we walk the fence line, and the estimate is free.
Most residential Tamko fence installations in Dallas take two to four working days from post removal to final gate adjustment. Weather and soil conditions can add a day, but we schedule the arrival window before work starts and we hold to it. You’ll know the start date, the daily schedule, and the completion target before we break ground.
Yes, our trucks carry the most-used Tamko rails, pickets, post caps, and gate hardware for common series models, which lets us complete most repairs in one visit. For less common series or full perimeter installs, we order the material from our supplier and confirm the lead time before scheduling. Either way, you get a written price before any work begins. Call (940) 204-5368 to schedule a free estimate.
Written by Trevor Nash, Owner, Penhallow Remodeling Dallas at Penhallow Remodeling Dallas, serving Dallas and nearby areas.
