Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Blanco Kitchen Remodeling: The Dallas Owner’s Guide
If you have a Blanco sink, faucet, or Silgranit work surface that’s part of a kitchen that needs real work, here’s the short answer: a Blanco kitchen remodel in Dallas typically runs $14,000 to $45,000 installed, and we can usually get your parts matched and the job scheduled within a week or two depending on scope. We carry and source Blanco-compatible components, and we quote the whole job in writing before we pull a single cabinet door off its hinges.
Most Dallas homeowners call us after the failure has already happened. The Blanco sink shows hairline cracks around the drain flange. The faucet cartridge starts dripping and won’t stop. Or the counter around an undermount sink has been quietly soaking up water for two years, and now the substrate (the moisture-resistant layer under your countertop) has swollen to the point where the seam is separating. By the time you’re looking for “Blanco kitchen remodeling in Dallas,” you’re usually past the YouTube-fix stage. That’s fine. We’ve seen it in Lakewood, Preston Hollow, and East Dallas more times than we can count. You’re not the first person whose Blanco faucet gave up after a North Texas summer of hard water.
Key Takeaways:
– Blanco kitchen remodels in Dallas run $14,000 – $45,000 depending on scope, cabinet line, and countertop material
– We match Blanco parts to your exact model number before quoting, so you’re not guessing on compatibility
– Every quote is written, line-itemed, and guaranteed for 365 days under the Done Right Promise
– Small repairs like a faucet swap or sink replacement can often be done as a standalone visit, not a full remodel
Which Blanco Models This Applies To
Blanco makes several sink lines, and they are not interchangeable. The Silgranit composite sinks (the matte granite-like material in colors like Truffle, Cinder, and Biscuit) have entirely different mounting requirements than the stainless steel Precision or Diamond series. If you have a Silgranit sink, the cutout tolerances are tighter, and the clips that hold it under the counter are color-coded to the sink model. If your original was a Diamond series double-bowl with a 9-inch depth, you can’t drop in a single-bowl Silgranit without recutting the counter and possibly dishing the cabinet face frame.
Here’s the practical part. Blanco stamps the model number on the underside of the sink basin and on the faucet body near the base. Pull up a flashlight, get under the sink, and look at the sticker – it’ll read something like “511-693” or “SILGRANIT 516370.” That number matters more than the series name. A Blanco 440073 faucet cartridge does not fit a Blanco 440074, even though they look identical from three feet away. Trevor Nash has spent enough time on his back under Dallas sinks to know that guessing here costs you a second trip and a leaky faucet.
On the OEM-versus-aftermarket question: for Blanco cartridges and faucet internals, we lean OEM. Blanco’s ceramic disc cartridges are built to tighter tolerances than most generics, and the difference shows up as a drip six months after the swap. For trim pieces – soap dispensers, escutcheon plates, spray-head docks – a quality aftermarket equivalent from a recognized supplier is usually fine and saves real money. We’ll tell you which is which when we quote. We’re not a Blanco dealer or affiliated with Blanco directly; we’re an independent Dallas remodeling contractor who happens to think their sinks and faucets are worth repairing rather than ripping out.
Styles & brands we work with
Signs Your Blanco Kitchen Remodeling Is Failing
Hairline cracks around the drain flange or basin corners. This is the number-one failure we see in Silgranit sinks in Dallas homes. The cracks form because the sink was under-supported during installation, or because a garbage disposal was added later and the extra vibration worked the mounting loose. If the crack is more than a half-inch long, the sink is no longer structurally reliable.
The faucet drips even after you replace the washer. Blanco uses ceramic disc cartridges, not rubber washers. When the cartridge wears – which hard water accelerates here in North Texas – no amount of tightening or cleaning fixes it. The fix is a new cartridge matched to your exact faucet model. We’ll often do this as a standalone repair while you decide on a bigger remodel.
The counter around your undermount sink looks darker at the seam. That’s water intrusion. The seal between the Blanco sink and the stone or quartz countertop has failed, and now the counter’s substrate is wicking moisture. Over time this causes the seam to lift, the counter to feel soft, and eventually delamination. In Dallas humidity and heat cycles, that damage moves faster than you’d think.
The sink flexes or moves when you press down on it. A properly mounted Blanco sink should feel like it’s part of the counter, not a bowl sitting in a hole. Movement means the mounting clips have loosened, the silicone has sheared away, or the cabinet face frame below is sagging. Hairline cracks usually follow within a year.
Water spots that etch, not wipe away. Dallas water runs hard – we’re seeing calcium and magnesium totals that would make a water softener salesman weep. Blanco stainless sinks take that mineral load daily. Annual polishing helps, but once the finish has etched into the grain, resurfacing is rarely worth it on an aging sink. That’s usually the moment homeowners start talking full Blanco kitchen remodeling instead of another polish.
Replacement Cost & What’s Included
Here’s the number you came for. A full Blanco kitchen remodel in Dallas – new Blanco sink and faucet installed, counters replaced or recut, cabinets resurfaced or replaced as needed – runs $14,000 to $45,000 installed. Smaller jobs shrink that considerably:
– Blanco faucet replacement only: $400 – $900 installed (faucet, cartridge, supply lines, disposal disconnect)
– Blanco sink replacement (drop-in, no counter change): $600 – $1,400 installed if the new sink fits the existing cutout
– Undermount Blanco sink replacement with counter recut: $1,800 – $3,200 including template, cut, and seal on existing stone
– Full kitchen remodel with Blanco products: $14,000 – $45,000 as noted, depending on cabinet line (KraftMaid Wellborn runs mid-range, custom cabinetry pushes higher) and countertop material (Silestone and Caesarstone quartz are our regular installs, Cambria carries its own lifetime warranty alongside ours)
The math behind the range is simple: cabinet replacement is the biggest variable. A $14,000 remodel usually means keeping your existing cabinet boxes, resurfacing faces, swapping the sink and faucet, and adding a new counter. A $45,000 remodel means new cabinets, new island, new appliances, new Blanco sink, and a counter you’ll never want to replace. Every one of our quotes is line-itemed: parts priced separately, labor priced separately, no mystery line, no verbal ballpark. The number we hand you is the number on the invoice. If it changes, it’s because you asked us to add something – and we’ll tell you the cost before we do it.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
We’re honest about this one because we’re the ones who get the phone call when a DIY swap goes sideways. If your Blanco faucet is dripping, you can absolutely try a cartridge replacement yourself – the part is $30 – $60, the instructions online are decent, and the worst outcome is a pinched O-ring and a do-over. We’ll even help you identify the right cartridge by model number if you call. That’s not where we make our living.
The line is the sink itself. An undermount Blanco Silgranit sink is heavy – 40 to 50 pounds, unevenly distributed – and it’s held to a stone counter with clips and silicone that must be applied in a specific sequence. If you’re on your back under the sink trying to balance it with one hand while tightening a clip with the other, that’s how the sink drops, the counter chips, or the seal fails. Hairline crack follows a few hundred flexes later. For undermount or full Blanco kitchen remodeling, call us at (940) 204-5368. For a faucet cartridge, call us for the part number, then decide. Either way, the number’s free.
FAQs
How long does a Blanco kitchen remodel take in Dallas?
Most Blanco kitchen remodels run two to six weeks from tear-out to final walkthrough, depending on whether we’re replacing cabinets or working with the existing boxes, and whether your countertop needs template time. A standalone Blanco sink or faucet swap is done in a day. Call (940) 204-5368 and we’ll give you a real arrival window and a written schedule, not a “when we get to it” shrug.
Can my Blanco sink be repaired instead of replaced?
Some surface scratches and hairline crazing on Silgranit can be polished out with Blanco’s own care products, but a structural crack through the bowl cannot be safely repaired – it’ll fail under water load, and that water goes straight into the cabinet below. We’ll tell you if your sink is a candidate for repair on our first visit. If it’s cosmetic, we’ll say so and show you the product. If it’s not, we won’t sell you false hope or a polish kit.
Do you stock Blanco parts on the truck?
We keep the most common Blanco cartridges, mounting clips, and drain assemblies on the truck for Dallas service calls because we replace them often enough to justify it. For anything model-specific we order from our supplier – usually a two-to-four-day turnaround. When we quote, we’ll confirm the exact part by your model number before we schedule, so the tech isn’t standing in your kitchen with a part that doesn’t fit.
Will the price change once the work starts?
No. That’s the whole point of how we run jobs. You get a written, line-itemed price before any work begins, and the number on day one is the number on the invoice – unless you ask us to add something, in which case we show you the cost and you approve it before we touch it. Every job also carries the 365-Day Done Right Promise in writing: if it isn’t done right, we come back and fix it at no charge. Free return visit. No re-inspection fee.
Ready to Get Your Blanco Kitchen Sorted in Dallas?
Call (940) 204-5368 and a live person answers – no phone tree, no voicemail, no callback window. We’ll ask about your Blanco model, talk through what’s actually failing, and give you options with real numbers. Whether that’s a faucet cartridge or a full Blanco kitchen remodeling job in Dallas, you’ll get a written price before we pick up a tool. Give you a number before I pick up a tool – that’s the only way I know how to start. And the way we finish is the same every time: a straight number, a real guarantee, and a kitchen you don’t think about twice.
Written by Trevor Nash, Owner, Penhallow Remodeling Dallas at Penhallow Remodeling Dallas, serving Dallas and nearby areas.
