Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Kitchen Remodeling: The Dallas Owner’s Guide
KraftMaid kitchen remodeling in Dallas typically runs $14,000 – $45,000 installed, depending on cabinet line, countertop material, and whether you’re refreshing existing KraftMaid boxes or pulling everything to the studs. We stock KraftMaid-compatible hardware, hinges, drawer slides, and trim, and in most cases we can match your existing finish same week. You usually find this page because a hinge snapped, a drawer slide gave out mid-pull, or you’re standing in a kitchen wondering whether it’s cheaper to repair the KraftMaid cabinets you have or replace them entirely.
That’s the exact conversation we have across Dallas kitchens every week, from Lakewood to Preston Hollow to the M Streets. And we start it the same way we finish it: with a written number, not a guess. If you want to skip the reading and just get a price, call (940) 204-5368 and we’ll come out, look at what you’ve got, and hand you a line-item quote before we touch a single cabinet.
Which KraftMaid Models This Applies To
KraftMaid has built cabinets under dozens of door styles and finish names since the 1970s, and the brand has gone through three major hardware platform changes in that time. The trick to matching parts isn’t the cabinet line name printed on the old brochure; it’s the hinge cup bore, the drawer slide length, and the overlay measurement. Older KraftMaid lines, including the pre-2010 Venicia and Passport series, used 35 mm cup hinges with face-frame overlay between 1/2 inch and 1-1/4 inches. Newer KraftMaid Vantage and standard lines shifted to the same 35 mm cup but with soft-close integrated slides and different mounting plate geometry.
Penhallow Remodeling Dallas is an independent contractor. We’re not a KraftMaid dealer and we don’t work for the manufacturer, which means when we tell you a part is discontinued, that’s just the truth, not a sales pitch for a new cabinet line. What we do is keep a running inventory of the most common KraftMaid failure points in the Dallas market: soft-close hinges, undermount drawer slides, cam locks, shelf pins, and corner braces. For hardware, we’ll use OEM KraftMaid parts when they’re available and reasonably priced. When they’re not, we’ll tell you exactly which aftermarket equivalent we’re using, what tolerance difference exists (usually none), and let you decide.
Here’s a compatibility gotcha most people don’t learn until they’ve ordered the wrong part twice: KraftMaid changed drawer slide profiles in 2015. The old slides had a 1/2-inch bottom mount; the new ones are 3/4-inch under-mount with a different catch. If your cabinets were installed before 2015 and you order new slides thinking they’re universal, they won’t seat. We’ve had dozens of Dallas homeowners show us a box of brand-new slides that will never fit their drawers. We keep both profiles on the truck.
Styles & brands we work with
Signs Your KraftMaid Kitchen Remodeling Is Failing
- Drawer won’t stay closed, or slams shut too hard. The soft-close mechanism inside the slide has either lost its damping fluid or the plastic catch has cracked. In Dallas, heat accelerates the fluid loss; we see it more in homes with west-facing kitchens.
- Cabinet door hangs crooked or rubs against the frame. The hinge plate has drifted, or the wood around a screw has stripped. KraftMaid doors are heavy, and once a hinge starts pulling, the weight does more damage every day.
- Drawer feels like it’s grinding or catching halfway out. A ball bearing inside the slide has flat-spotted, or the slide track has bent from an overloaded drawer. Once you feel resistance, stop yanking; the metal will score the other side.
- Corner cabinet door won’t align after years of fine operation. The cam lock holding the face frame has worked loose. This is the single most common KraftMaid-specific issue we repair in Dallas, especially in homes with slab foundations that shift seasonally.
- Finish peeling or bubbling near the sink or dishwasher. The clear coat is failing from moisture exposure, which is more aggressive in Dallas summers when air conditioning doesn’t run consistently. This is a refinish job, not a hardware swap, and we can tell you whether your doors are worth saving.
Replacement Cost & What’s Included
Here are the Dallas numbers we quote and stand behind. A full KraftMaid kitchen remodel, with cabinets, countertops, backsplash, and labor, runs $14,000 – $45,000 depending on kitchen size, whether you’re keeping existing cabinet boxes or replacing them, and the countertop material you choose. A small kitchen remodel runs $9,000 – $20,000. If you’re just doing cabinets, installation runs $4,000 – $13,000; countertops add $2,000 – $6,500; backsplash runs $800 – $2,500; and a new island runs $3,000 – $10,000.
Every quote includes the same thing: a written line item for parts, a written line item for labor, a defined arrival window, and the 365-Day Done Right Promise in writing. That promise means if the hinge we installed six months ago fails, we come back and fix it at no charge. No service call fee, no re-inspection fee, no argument. As Trevor Nash puts it: “Give you a number before I pick up a tool – that’s the only way I know how to start.” That’s how every Dallas job begins.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Replacing a shelf pin or tightening a loose hinge screw is a Sunday morning job most homeowners can do without us. Where DIY goes wrong is with soft-close hinges and drawer slides. You need the exact overlay measurement, the right screw length (too long and you pierce the door face, too short and the hinge walks out of the bore), and enough patience to adjust three axes of alignment. We’ve repaired more stripped-out hinge bores from aggressive DIY attempts than we have from normal wear. If you’re not sure, call (940) 204-5368 and describe what you’re seeing. We’ll tell you over the phone whether it’s a five-minute fix or a truck-roll job, and we won’t charge you for the advice.
FAQs
A well-maintained KraftMaid kitchen in Dallas lasts 20 – 30 years for the cabinet boxes, while hinges and drawer slides typically need replacement at the 10 – 15 year mark, sooner in kitchens with heavy daily use. Call (940) 204-5368 for an exact assessment of your kitchen, and we’ll tell you what has years left versus what needs replacing now.
Some hardware can be repaired, hinges can be re-tightened and aligned, but once a soft-close slide has lost its damping fluid or a hinge spring has snapped, the repair is temporary and the correct fix is replacement. Call (940) 204-5368 and we’ll tell you honestly whether a repair is worth your money or just puts off the inevitable.
Most hinge and drawer slide replacements run two to four hours for a standard Dallas kitchen, with no demolition and no need to empty cabinets above the affected drawers. Estimates are free, and we’ll give you a written arrival window when you book.
We keep the most common KraftMaid hinges, slides, cam locks, and shelf pins stocked on our trucks, and we also stock Cambria, Silestone, and Kohler parts for kitchens that mix those brands. If your part isn’t on the truck, we’ll have it ordered within a day and installed the week it arrives.
Call Penhallow Remodeling Dallas for Your Free Estimate
If your KraftMaid kitchen is showing its age, whether it’s one drawer that won’t close or a full remodel you’ve been putting off, call (940) 204-5368. We’ll schedule a visit, put a written price in your hand before any work begins, and back the job with a 365-day promise that means exactly what it says. No pressure, no change orders at the door, and no surprises on the invoice. Just a straight number before we pick up a tool.
Written by Trevor Nash, Owner, Penhallow Remodeling Dallas at Penhallow Remodeling Dallas, serving Dallas and nearby areas.
