Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Irving, TX | Penhallow Remodeling Dallas
We provide independent Jerith fence service across Irving, TX, from the Hospital District to Valley Ranch and every neighborhood between. The thing that makes our Jerith work different here is simple: we engineer every repair around Irving’s expansive clay soil, which heaves shallow-set fence posts within a season or two if someone cuts corners. Call us at (940) 204-5368 for a free estimate on any Jerith residential fence, gate, or panel repair.
Trevor Nash and our crews at Irving General Contractor know Jerith product lines inside out because we’ve pulled apart hundreds of them. We’re an independent Jerith service provider, not a manufacturer affiliate, which means we make repair decisions based on what actually holds up in Irving’s soil and weather, never on a corporate warranty script. If you’re in Irving and your Jerith fence is leaning, sagging, or popping panels, give you a number before I pick up a tool, that’s the only way we know how to start.
Why Irving Residents Choose Us for Jerith Service
Most fence companies in Irving will swap panels and call it done. We won’t, because we’ve seen what happens when a Jerith fence gets treated like a generic aluminum job in this soil. Our crews have serviced hundreds of Jerith residential installations in Irving’s 1960s to 1980s slab homes and low-rise multifamily properties. We routinely address post and panel failures, gate sag, and footing movement caused by expansive soil. That’s not a line on a brochure; it’s what our trucks are loaded for every morning.
Trevor trained at Los Angeles Trade-Technical College and spent years on everything from foundation repairs to full kitchen gut-outs before serving the Dallas area, where he’s worked jobs from Oak Cliff bungalows to newer builds near White Rock Lake. That foundation background matters in Irving, because a leaning Jerith post is usually a footing problem first and a fence problem second - experience that carries over from our Bathroom Remodeling - Irving work. We stock OEM Jerith hinges, latches, post caps, and pickets for fast turnaround, and we pair those parts with deeper concrete piers than what the original installer probably poured. The fence is only as straight as the hole beneath it.
Styles & brands we work with
Common Jerith Construction Problems We Solve in Irving
- Gate post lean and sag from expansive clay heave. Irving’s clay swells when wet and shrinks when dry, and a shallow-set Jerith post can’t fight that cycle. Within 18 months, the gate drags, the latch won’t line up, and the whole section lists toward the alley.
- Aluminum panel popping at corners and loosening rail pickets after hail. Irving sits in a hail corridor. When a spring storm throws golf-ball ice at a Jerith panel, the corner connectors flex and the pickets work loose from the rail. We re-seat everything and replace crimped connectors with OEM parts.
- Powder coat chalking and blistering on south and west facing lines. North Texas UV is relentless, and the black powder coat on a Jerith fence that faces the afternoon sun in Irving will chalk and dull years before the fence itself fails. We can re-coat or replace panels depending on how far the finish has degraded.
- Gate hinges seizing or fracturing after wind-driven gate slam. Irving gets real spring winds, and a gate that slams once too often against its stop will stress the hinge pins until they seize or snap. We replace with OEM Jerith hinges and re-align the gate so it closes without fighting the wind.
- Original shallow footings crumbling or floating out of grade. Many Jerith installations in Irving’s older neighborhoods went in with 18-inch square footings and whatever concrete was on the truck. Between clay movement and drainage issues, those footings crack and the posts float. We excavate and set new piers that actually hold.
Jerith Service in Irving: What Local Conditions Mean for Your Equipment
Here’s what you need to know about owning a Jerith fence in Irving specifically. The city requires a Residential Fence Permit for any new fence or substantial repair, and it costs $55. The permit application requires a site plan showing post depth and soil-bearing assumptions. That’s not bureaucracy for its own sake. The same expansive clay that cracks Irving slabs also heaves fence piers within 18 months if they’re under-designed. A fence company that doesn’t understand why the city asks those questions is a fence company that’s going to dig shallow, pour weak concrete, and leave you with a leaning fence two seasons later. In neighborhoods like the Hospital District and Del Rancho, where homes date to the 1960s and 1970s, we pull the original footings almost every time and re-set posts to a depth that survives DFW wet-dry cycles. Jerith fences are built well at the panel level. The failure point in Irving is almost always what’s underground.
Jerith Models & Products We Service in Irving
We work on the full Jerith residential lineup: the Residential Aluminum Fence, the Estate Series, the Regal Series, and the Manor Steel Fence. For Irving homeowners, the Estate Series and Residential Aluminum are the most common on slab-on-grade lots, while Manor Steel shows up more on larger properties and HOA-governed communities. We stock OEM Jerith hinges, latches, post caps, and pickets for quick repairs. When a post is structurally unwelded or its corrosion is internal to the gate square, we recommend a full section replacement rather than a patch. For failed posts and concrete footings, we use a higher-psi US-sourced concrete and deeper piers than the original shallow footings typical in older Irving installations. You keep your Jerith panels. You get a footing that actually stays put. That’s the whole exchange, and it’s a good one.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Irving
Every Jerith job in Irving gets a written price before any work starts. Not an estimate range, not a verbal ballpark. A written number you can hold us to. Here’s what Jerith-related work typically runs in our market:
| Service | Price Range |
|---|---|
| Aluminum Fence Installation (Jerith panels, labor, and concrete footings) | $4,000 – $10,000 |
| Vinyl Fence Installation | $3,500 – $9,000 |
| Standing Seam Metal Roof | $15,000 – $40,000 |
The biggest cost driver on a Jerith fence job in Irving is what’s underground: how deep we need to dig, how bad the clay movement has been, and whether existing footings can be reused. A simple panel replacement on solid footings runs at the low end; full post excavation and re-setting pushes toward the top. Call (940) 204-5368 and we’ll give you an exact quote. Estimates are free.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Irving
Irving’s expansive clay soil swells when wet and shrinks when dry, and that cycle pushes against shallow-set fence footings until the posts tilt. Most original installations in 1960s to 1980s neighborhoods used footings too shallow for this soil. We excavate to 30 inches, set posts in 3500 psi concrete with a bell bottom, and the posts stay put. Call (940) 204-5368 for a footing inspection, free of charge.
Yes, and this is one of the most common calls we get in Irving. The gate leaf pulls away from the hinge post as the soil moves, and the latch side drops. We re-align the hinge post, replace worn OEM hinges, and re-hang the gate so it clears the ground and closes square. If the post itself has moved, we re-set it rather than shimming the gate.
The powder coat holds up well for years, but Irving’s UV exposure on south and west facing fence lines will eventually cause chalking and dulling. Hail can chip the finish in spots. We can replace individual panels to match, or re-coat full runs depending on the condition. Matching the original Jerith finish is part of why we stock OEM panels and touch-up kits.
Yes. Irving requires a Residential Fence Permit for new fence construction and substantial repairs. The permit costs $55 and requires a site plan showing post depth and soil-bearing assumptions. We handle the permit application as part of the job, because we pull permits and pass inspections on every project where they’re required.
We can match Jerith panel styles, colors, and post caps to blend a new section with your existing fence. We have relationships with Jerith parts suppliers in DFW and can source the exact panel profile and finish. If the existing powder coat has faded, we’ll talk through blending options so the new section doesn’t stand out in a way that draws HOA attention. Call (940) 204-5368 and we’ll come look at the fence line.
Service Areas Near Irving
Penhallow Remodeling Dallas serves Irving and the surrounding DFW communities. We provide independent Jerith sales & service across the metroplex, with regular crews working in Irving service area neighborhoods including the Hospital District, Del Rancho, and Valley Ranch. If you’re just outside Irving, see our Jerith service in Dallas page or Jerith service in Plano for coverage details in those cities.
Book Your Jerith Service in Irving Today
If your Jerith fence is leaning, sagging, or showing hail damage, we’ll come look at it and give you a written price before any work starts. Call (940) 204-5368 and a real person will answer. Same-day and next-day appointments are usually available for fence inspections in Irving.
Written by Trevor Nash, Owner at Penhallow Remodeling Dallas, serving Irving since 2004.
