Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Custom Window & Door Order Cost in Dallas?
A custom window and door order in Dallas, TX typically runs between $4,500 and $25,000 depending on how many openings you’re replacing, the materials you choose, and whether the job requires structural work. For a standard single-door replacement, most Dallas homeowners pay $1,800 to $4,500. For a full-home window package with mid-range vinyl frames, expect $8,000 to $15,000 installed.
These are real numbers from the Dallas market in 2026, not national averages. Labor rates, code requirements, and material availability in North Texas all shape what you’ll actually pay. Below we break down exactly where your money goes, what drives the price up or down, and how to get a written number you can hold a contractor to.
Key Takeaways:
- Custom window orders in Dallas average $800 – $2,200 per window installed, depending on material and glass package.
- Custom entry doors run $1,800 – $6,500 installed; patio or sliding doors run $2,500 – $9,000.
- Full-home window replacement (8 – 12 windows) typically lands between $8,000 and $18,000.
- Impact-rated windows, required in some Dallas-area installations, add $400 – $900 per window.
- Penhallow Remodeling Dallas writes the price down before work starts. No verbal ballparks, no day-of surprises.
Custom Window & Door Order Cost Breakdown (2026)
Here’s what a custom window and door project looks like line by line in the Dallas market right now. These ranges reflect installed pricing, including labor, materials, haul-away, and standard trim work.
| Line Item | Typical Range (Installed) | What It Includes |
|---|---|---|
| Single custom window (vinyl) | $800 – $1,600 | Standard size, double-pane, low-E glass, basic trim |
| Single custom window (wood or wood-clad) | $1,400 – $2,800 | Premium frame material, interior wood finish |
| Single custom window (impact-rated) | $1,600 – $3,200 | Laminated glass, reinforced frame, code-required hardware |
| Custom entry door (steel or fiberglass) | $1,800 – $4,500 | Pre-hung unit, hardware, weatherstripping, install |
| Custom entry door (solid wood) | $3,000 – $6,500 | Premium species, custom stain or paint, upgraded hardware |
| Sliding patio door | $2,500 – $5,500 | Standard 6-foot unit, tempered glass, track and hardware |
| French patio door (pair) | $3,500 – $9,000 | Double-door unit, hinges, hardware, threshold |
| Full-home window replacement (8 – 12 windows) | $8,000 – $18,000 | Includes tear-out, install, insulation, interior and exterior trim |
| Impact window installation (whole home) | $12,000 – $25,000 | 8 – 12 impact-rated windows, code compliance, structural checks |
What moves these numbers? Three things, mostly. First, material choice. Vinyl is the workhorse in Dallas, it handles the heat and humidity well and costs the least. Wood-clad and fiberglass look sharper and run 40% to 70% more. Second, glass package. Low-E coatings and argon fill are standard now, but if you want acoustic glass for a home near I-635 or DFW Airport, plan on $150 to $350 extra per window. Third, the condition of your existing openings. Rotted framing around a window in an older East Dallas or Oak Cliff home means the crew has to reframe before the new unit goes in, and that’s labor you don’t pay on a clean tear-out.
What Affects Custom Window & Door Order Pricing in Dallas
Every home is different, but in Dallas specifically, these are the factors that consistently move the final number.
- House age and framing condition. Homes built before 1980 in neighborhoods like Lakewood, M Streets, and Casa Linda often have dimensional lumber framing that’s settled or has moisture damage around window openings. If the crew finds rot or termite damage once the old unit is out, you’re looking at $200 to $600 per opening in repair work before the new window or door can go in.
- Impact-rating requirements. Dallas building code requires impact-rated glass or shutters in certain windborne debris zones, which include some northern and eastern sections of the city. If your home falls in one of these zones, expect impact-rated windows to add $400 to $900 per unit. It’s not optional, and a permitted job will fail inspection without it.
- Material and finish upgrades. Standard white vinyl is the baseline. Custom colors, wood-grain interiors, black exterior frames, and specialty hardware all add cost. A black-framed window package, which is popular in newer builds in Bishop Arts and Lower Greenville, runs 15% to 25% above standard white vinyl.
- Glass package. Double-pane low-E is the default in Dallas because summer heat is the real enemy. Triple-pane adds $100 to $250 per window and helps more with noise than with energy bills. If you’re near Love Field, the medical district, or a busy corridor like Central Expressway, acoustic glass might be worth the upcharge.
- Second-story or difficult access. Working off ladders or scaffolding adds $100 to $300 per opening. On a two-story home in Preston Hollow or North Dallas, expect the upper-floor windows to run on the higher end of every range.
- Permit and inspection fees. The City of Dallas charges permit fees for structural window and door work, usually $75 to $400 depending on scope. Some contractors bury this in the quote, some list it as a line item. Either way, you’re paying it.
Custom Window & Door Order vs. Standard Replacement: What’s the Difference?
When a contractor says “custom order,” they mean the window or door is manufactured to your exact opening dimensions and specifications. Standard replacement means pulling a stock unit off the shelf at a supply house and making it fit, which usually means shimming gaps, adding filler trim, and accepting a slightly different size than what was originally there.
Custom orders matter more in older Dallas neighborhoods. A home in Lake Highlands or Kessler Park built in the 1960s has openings that were framed by hand, and no two are exactly the same. Stock units leave gaps that get hidden with caulk and trim, but those gaps leak air and let the Texas heat in. A custom unit fits the actual opening, seals tighter, and lasts longer. You pay 20% to 35% more for custom, and in an older home, it’s usually the right call.
How to Save on Custom Window & Door Order
You don’t have to pay top dollar to get a good window or door. Here’s what actually moves the needle in Dallas.
- Bundle the job. Replacing one window at a time means paying repeated trip charges and minimum labor fees. Waiting until you have four or more openings to replace drops the per-unit cost by 10% to 20%. A contractor can spread setup, disposal, and equipment costs across more units.
- Stay with standard sizes. If your framing allows it, ordering windows within 2 inches of a standard size saves $50 to $150 per unit in manufacturing charges. Custom dimensions are where the factory adds cost.
- Choose vinyl now, upgrade later. Vinyl has come a long way. Today’s vinyl windows in Dallas carry energy ratings that would have been premium-grade fifteen years ago. If budget is tight, quality vinyl with low-E glass will perform well, and you can put the savings into a better entry door where curb appeal pays back faster.
- Ask about the full package price. Some companies quote the window itself and bury trim, disposal, insulation, and permit fees in the fine print. Get a written number that includes everything. At Penhallow Remodeling Dallas, the price you’re handed before work starts is the price on the final invoice. That’s the Kingswell standard, and it’s been the rule since 2004.
- Time it right. Window and door manufacturers run their best pricing in the late fall and early winter, when demand drops after the summer rush. If you can wait until October or November, you’ll often see 5% to 10% off material costs.
The single best way to know what your project will cost is to get a written estimate. Not a verbal range, not a “probably around” figure. A written number. Call us at (940) 204-5368 and we’ll schedule a time to measure, talk through materials, and hand you a price in writing. Estimates are free, and nobody’s going to pressure you into signing anything.
Why Dallas Weather Makes Window and Door Quality Non-Negotiable
Dallas gets the worst of both worlds. We hit 100 degrees for weeks at a time in July and August, then dip below freezing often enough in January and February that a bad seal shows up as a draft you can feel from across the room. Add in hail season in the spring and the occasional ice storm, and your windows and doors are taking abuse twelve months a year.
This is why glass package matters more than frame color. A low-E double-pane window with argon fill will cut solar heat gain by 40% to 50% compared to a builder-grade single pane, and in a Dallas summer that’s the difference between an AC unit that cycles normally and one that runs all afternoon. For doors, it’s about the seal. A fiberglass entry door with a thermal break and quality weatherstripping holds up to North Texas temperature swings without warping the way solid wood can.
The hail piece is worth taking seriously too. Dallas gets more hail events per year than almost any major metro in the country. Impact-rated windows are the only ones that hold up to a serious hailstorm without cracking. If your home is in an impact zone, code already requires them. If it’s not, they’re still worth considering if you’ve got large west-facing windows that take the brunt of spring storms.
Custom Window & Door Order Timeline: What to Expect
Custom orders take time because the units are built after you approve the specs. Here’s the realistic timeline for a Dallas project.
- Measure and quote: 1 to 2 hours on site. We’ll measure every opening, check for rot or structural issues, and talk through material options. You’ll get a written price before we leave or within 24 hours.
- Order placement: 1 to 3 days after you approve the quote and sign off on the order form. The lead time clock starts when the factory receives the order.
- Manufacturing: 3 to 8 weeks depending on the manufacturer and the size of the order. Custom wood windows take the longest. Vinyl is faster. Impact-rated glass adds a week or two.
- Delivery and scheduling: We coordinate delivery with the factory and schedule your installation date once the units are in hand. No showing up with half an order.
- Installation: 1 to 3 days for most whole-home jobs. A single door is a half-day. A full window package on a two-story home takes two to three days.
During the install, we protect the floors, keep the work area clean, and haul away every old window, door, and scrap of trim. The crew is background-checked and uniformed, so you know exactly who’s in your home. That’s just how Penhallow Remodeling Dallas operates, and it’s been the standard since the Kingswell family of companies started doing this work in 2004.
FAQs – Custom Window & Door Order Cost
How much does a custom window cost in Dallas?
A single custom window in Dallas runs $800 to $2,800 installed, depending on material. Vinyl is the most affordable at $800 to $1,600 per window. Wood-clad runs $1,400 to $2,800. Impact-rated windows, which some Dallas homes are required to have by code, start around $1,600 per window. Call (940) 204-5368 for a written estimate on your specific openings.
Is it cheaper to repair or replace a window?
For a broken seal, fogged glass, or a cracked pane, repair typically runs $150 to $500 and makes sense if the frame is still solid and the window is less than 15 years old. Once the frame is warped, the sash is failing, or the unit is over 20 years old, replacement is the better investment at $800 to $2,800 per window. We’ll give you an honest recommendation either way, and the price is written down before any work starts.
How much does a custom front door cost in Dallas?
A custom front door in Dallas runs $1,800 to $6,500 installed. Steel and fiberglass doors with basic hardware fall in the $1,800 to $4,500 range. Solid wood doors with custom finishes run $3,000 to $6,500. The door slab itself is only part of the cost: installation, hardware, weatherstripping, and any frame adjustment all factor into the final number.
Do I need a permit for window or door replacement in Dallas?
Yes, the City of Dallas requires a permit for window replacement when the opening size changes or when structural work is involved, and for most exterior door replacements. Permit fees typically run $75 to $400. Any licensed contractor should handle this as part of the job. If someone tells you to skip the permit, that’s a red flag. Penhallow Remodeling Dallas pulls every permit required by the city, and the cost is included in your written quote.
How long do custom windows and doors last in Dallas?
Quality vinyl windows in the Dallas climate typically last 20 to 30 years. Wood-clad windows can last 30 to 40 years with proper maintenance. A well-installed fiberglass or steel entry door will last 25 years or more. The biggest enemy in North Texas is the sun, which breaks down seals and fades finishes. Low-E glass and quality weatherstripping are the two things that extend lifespan most, and they’re standard on every order Penhallow handles.
Can you replace windows or doors the same day?
Stock replacement windows and doors can sometimes be installed same-week if the units are available at a local supply house. Custom orders take 3 to 8 weeks because the units are built to your measurements after you approve the order. If you have a broken window or an exterior door that won’t close, call us at (940) 204-5368 and we’ll talk through temporary options while your custom order is in production.
Get a Written Price Before You Commit
Most contractors in Dallas will give you a verbal estimate and hope you sign before the real number shows up. That’s not how we work. Penhallow Remodeling Dallas puts the price in writing before any work starts, gives you a real arrival window, and backs every custom window and door installation with our 365-Day Done Right Promise. If something fails inside that guarantee period, we come back and fix it at no charge. It’s written into every contract, same as the price.
If you’re ready to find out what your custom window and door project actually costs, call us at (940) 204-5368 for a free estimate. A live person answers 24/7, not a voicemail maze. We’ll schedule a time to measure your openings, walk you through material options, and hand you a written number you can hold us to. No pressure, no guessing, no surprises.
Pricing reflects the Dallas market as of 2026. Penhallow Remodeling Dallas offers free estimates – call (940) 204-5368.
Written by Trevor Nash, Owner at Penhallow Remodeling Dallas, serving Dallas homeowners with written pricing and guaranteed workmanship under the Kingswell standard since 2004.
What Our Customers Say
"Kitchen and dining room opened up into one space. They were honest about which wall could come down and which couldn't, no sugarcoating. Dust was kept way down with plastic everywhere."
- Oscar Benitez"Full home refresh before we sold. They were straight about what was worth doing and what wasn't to get our money back. On time, on budget, and it sold in a week."
- Monica Vaughn"We'd been burned by a contractor before who disappeared halfway. Penhallow finished on time and stood behind everything. The written price gave me peace of mind the whole way."
- Simone Clarke
